Abstract:A series of composites based on epoxy resin filled with additives of natural origin were prepared to investigate the influence of such fillers on the properties of the epoxy compositions. For this purpose, the composites containing 5 and 10 wt.% of additive of natural origin were obtained using the dispersion of oak wood waste and peanut shells in bisphenol A epoxy resin cured with isophorone-diamine. The oak waste filler had been obtained during the assembly of the raw wooden floor. The performed studies include testing of samples prepared using unmodified and chemically modified additives. Chemical modification via mercerization and silanization was performed to increase the poor compatibility between the highly hydrophilic fillers of natural origin and the hydrophobic polymer matrix. Additionally, the introduction of NH2 groups to the structure of modified filler via 3-aminopropyltriethoxysilane, potentially takes a part in co-crosslinking with the epoxy resin. Fourier Transformed Infrared Spectroscopy (FT-IR), as well as Scanning Electron Microscopy (SEM), were carried out, to study the influence of performed chemical modification on the chemical structure and morphology of wood and peanut shell flour. SEM analyses showed significant changes in the morphology of compositions with chemically modified fillers, indicating improved adhesion of the resin to lignocellulosic waste particles. Moreover, a series of mechanical (hardness, tensile strength, flexural strength, compressive strength, and impact strength) tests were carried out, to assess the influence of the application of fillers of natural origin on the properties of epoxy compositions. All composites with lignocellulosic filler were characterized by higher compressive strength (64.2 MPa-5%U-OF, 66.4%-SilOF, 63.2-5%U-PSF, and 63.8-5%SilPSF, respectively), compared to the values recorded for the reference epoxy composition without lignocellulosic filler (59.0 MPa-REF). The highest compressive strength, among all tested samples, was recorded for the composite filled with 10 wt.% of unmodified oak flour (69.1 MPa-10%U-OF). Additionally, higher values of flexural and impact strength, concerning pure BPA-based epoxy resin, were recorded for the composites with oak filler (respectively, flexural strength: 73.8 MPa-5%U-OF and 71.5 MPa-REF; impact strength: 15.82 kJ/m2-5%U-OF, 9.15 kJ/m2-REF). Epoxy composites with such mechanical properties might be considered as broadly understood construction materials. Moreover, samples containing wood flour as a filler exhibit better mechanical properties compared to those with peanut shell flour (tensile strength for samples containing post-mercerization filler: 48.04 MPa and 40.54 MPa; while post-silanization 53.53 MPa and 42.74 MPa for compositions containing 5 wt.% of wood and peanut shell flour, respectively). At the same time, it was found that increasing the weight share of flour of natural origin in both cases resulted in the deterioration of mechanical properties.

Modified Natural Eucommia Ulmoides Gum Effectively Improves the Toughness and Strength of Epoxy Resins

Toughening of Epoxy Resin with Functionalized Core‐sheath Structured PAN/SBS Electrospun Fibers

Efficient Separation of Eucommia Ulmoides Gum (EUG) and Directed Fabrication of Reconstructed Materials from Eucommia Seed Shell Based on Ingenious Biphasic Solvent System

Highly Crosslinked and Uniform Thermoset Epoxy Microspheres: Preparation and Toughening Study

Chitosan toughened epoxy resin by chemical cross-linking: Enabling excellent mechanical properties and corrosion resistance

The effects of the contents of modified‐diatomite on the properties of modified‐diatomite/epoxy resin composites

Efficient Toughening of DGEBA with a Bio-Based Protocatechuic Acid Derivative

Modification of Epoxy Compositions by the Application of Various Fillers of Natural Origin

Enhanced toughness and thermal conductivity for epoxy resin with a core–shell structured polyacrylic modifier and modified boron nitride

Toughness Improvement of Epoxy Composites Using a Kind of Environment-Friendly Bio-Based Polyester Polyol

Toughness and its mechanisms in epoxy resins

Toughening of epoxy resin with balanced performance by in situ constructing interfacial bonding and elastic segments into epoxy network

High-Impact Epoxy Resins with Superior Hydrophobicity Toughened by Epoxy Functionalized Poly(olefin-alt-maleimide) Derivatives

Synchronously Improving Mechanical and Thermal Performances of Cured Epoxy Resins by Epoxidized Polyether Sulphones As Modifiers

Toughness modification of cationic UV-cured cycloaliphatic epoxy resin by hydroxyl polymers with different structures

Toughening modification of epoxy resins by epoxy‐terminated hyperbranched polyethers fabricated by doping sorbitol with inositol

Lignin-based silicone-modified epoxy resin with enhanced strength and toughness

Enhancing mechanical, thermo-mechanical and low velocity impact properties of epoxy methyl ricinoleate toughened epoxy composites by integrating microcrystalline cellulose

Synthesis of an alkynyl‐ and allyla‐ terminated modifiers and its thermal and mechanical properties in copolymer with epoxy resin

Synthesis of Bio-based Epoxy Containing Phosphine Oxide as a Reactive Additive Toward Highly Toughened and Fire-retarded Epoxy Resins

Tung Oil-Based Modifier Toughening Epoxy Resin by Sacrificial Bonds