Abstract:High temperature thermal conductivity up to 1200 °C and the electrical conductivity up to 800 °C were studied for (Zr-Ta-W-Ti)C-SiC (ZTaWT-S) based high entropy carbide ceramics containing carbonaceous reinforcements (multi-walled carbon nanotubes (CNT), graphite flakes (G), and graphene nanoplatelets (GNP). The thermal diffusivity (0.055–0.067 cm −2 s) and specific heat capacity (0.38–0.44 Jg −1 K −1 ) were experimentally measured from 50 °C to 1200 °C for all the composites. The thermal conductivity of the composites lies in the range of 18.2 Wm −1 K −1 to 22.9 Wm −1 K −1 for the temperature range of 50 °C-1200 °C, from the significant phonon scattering at the interfaces of the elements of different size and atomic masses. At 50 °C, the limited thermal conductivity enhancement for carbonaceous reinforcements from 18.2 Wm −1 K −1 for ZTaWT-S to 21.0 Wm −1 K −1 for ZTaWT-SC (CNT reinforcement) to 20.8 Wm −1 K −1 for ZTaWT-SG (graphite reinforcement), and to 19.9 Wm −1 K −1 ZTaWT-SGNP (graphene reinforcement) is attributed to the high thermal resistance at the interfaces between different phases and interface with carbon additives, evident in the TEM investigation of the crushed sintered sample, and at the grain boundaries (interfacial thermal resistance). The phonon and electron contribution to thermal conductivity were also assessed and the κe/κexp ratio analysis confirms the predominant role of phonon contribution to thermal conductivity (∼65%) at low temperature (∼50 °C) and of electronic contribution at high temperatures (∼800 °C) as the dominant mechanism of thermal transport in the investigated composites and ZTaWT-SGNP composite with the highest κe/κexp ratio of 0.84 (extrapolated) emerges as the most electronically conductive material.

The Phase Behavior Changes of Black Talc at High Temperature and Performance of its Ceramic Composite Materials

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

The Influences of Ball Milling Processing on the Morphology and Thermal Properties of Natural Graphite-Based Porous Graphite and Their Phase Change Composites

Phase behaviors of talc minerals in carbothermal reduction process

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Preparation and Thermal Properties Characterization of Carbonate Salt/carbon Nanomaterial Composite Phase Change Material

Microstructure and Phase Transformation of Graphene-Cement Composites under High Temperature

Elevated temperature thermal and electrical properties of carbon nanotubes, graphite and graphene reinforced (Zr-Ta-W-Ti)C-SiC based high entropy carbide ceramics

Whitening and Phase Variation of Black Talc by Calcination from Guangfeng Area,Jiangxi Province

Preparation and mechanical performance of ductile Csf/Al2O3-BN composites, Part 1: Effects of fiber length and sintering temperature

Performance and Phase Behavior of Quartz-Aluminum Matrix Composites

Thermal Performances of Myristic Acid/Bentonite/Graphene Composite Phase Change Materials

Time-dependent high-temperature compressive failure behavior of high-silica/boron-phenolic composites modified with boron carbide and talc

The Roles of Geometry and Topology Structures of Graphite Fillers on Thermal Conductivity of the Graphite/aluminum Composites

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

Microstructure and Mechanical Properties of AlN-TiN-TiB2 Composite Conductive Ceramics

Effect of Pyrocarbon Content on Thermal and Frictional Properties in C/C Preforms of C/C–SiC Composites

Microstructure and Mechanical Properties of Carbide Reinforced TiC-Based Ultra-High Temperature Ceramics: A Review

Preparation and Characterization of Light-Color Conductive Composite Based on Talc

Three Dimensional AlN Skeleton-Reinforced Highly Oriented Graphite Flake Composites with Excellent Mechanical and Thermophysical Properties

The Effect of Phase Transformation on the Thermal Expansion Property in Al/ZrW 2 O 8 Composites