Abstract:Polycrystalline diamond composites (PDC) have been used as a cutting material in a multitude of fields, from mechanical processing to oil and gas drilling. In this study, PDC samples were prepared under high pressure and high temperature (HPHT) conditions within a pressure interval of 5.5 to 10.5 GPa by sintering diamond powder (average grain size ~3 μm) with WC-10 wt% Co substrate. Samples obtained with varying sintering pressures and temperatures were characterized using Vickers hardness tester, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results revealed that: (1) within a specified material system, each distinct sintering pressure condition corresponds to a unique optimal sintering temperature that yields the pinnacle of consolidation efficiency in samples. This optimal temperature exhibits a linearly increasing trend with rising sintering pressure; (2) at the intersection where the sintering pressure attains its optimal match with temperature, an increase in pressure fosters more intimate contact and stronger inter-grain bonding among diamond particles, thus amplifying the DD bond formation effect, which consequently leads to a linear enhancement in the Vickers hardness values of PDC with increasing sintering pressure; (3) simultaneously, under conditions of optimal temperature matching, elevating the sintering pressure notably decreases the cobalt content within the polycrystalline diamond layer of PDC samples. These findings furnish crucial experimental evidence for optimizing PDC material properties, significantly contributing to the advancement of both theoretical exploration and technological innovation within the field, carrying profound academic value and practical guidance implications.

A Study on the Microstructure of Polycrystalline Diamond Composite (PDC) for Valves

Research Progress of Thermal Stability for Polycrystalline Diamond

Researches and Prospects of Polycrystalline Diamond Compacts

Preparation, wear resistance, and impact toughness of homoepitaxial diamond film deposited on polycrystalline diamond compact by HFCVD method

Effect of pressure on sintering behavior of polycrystalline diamond

Polycrystalline Diamond Cutters Sintered with Magnesium Carbonate in Cubic Anvil Press

Study on cobalt removal process of PDC by pressurized chemical precipitation method

Study on Welding Technique of PDC

Effects of composite binder and sintering temperature on the microstructure, properties and reaction mechanism of polycrystalline diamond

Nanoengineered Polycrystalline Diamond Composites with Advanced Wear Resistance and Thermal Stability

The novel and facile electrolysis method for removing the cobalt binder phase from large diameter polycrystalline diamond compacts

Novel high-performance polycrystalline diamond compact enhanced using vanadium additives

Control morphology and properties in additive manufacturing of functional gradient cemented carbides for polycrystalline diamond substrates

Study of Microstructure of Coarse-grain Tungsten Carbide Composite Produced by In-Situ Metallurgy Reaction

Effects of carbon nanotubes and sintering parameters on microstructure and properties of PCD

Synthesis and characterization of nPCD sintered from OLC and Microdiamond

Comparing the tribological behavior of polycrystalline diamonds against steel GCr15 and ceramic Si 3 N 4 : friction and wear

Study on Effect of High-Entropy Alloy Binder on Microstructure and Properties of WC Cemented Carbide Doped with Rare Earth Oxide

Tribological behavior of PDC-cutter including cemented carbide and polycrystalline diamond composites produced by HPHT for drilling applications

Study on Electrical Discharge and Ultrasonic-Assisted Mechanical Combined Machining of Polycrystalline Diamond

Cobalt Diffusion During the Initial Stage of CVD Diamond Growth on Cemented Carbide – A Molecular Dynamics and Experimental Study