Abstract:Although amounts of steel slag are left as waste, advances in treatment technologies have made steel slag a potential low-carbon supplementary cementitious material. Replacing cement with steel slag will drastically reduce carbon footprint, especially, in the engineering field where there are efforts to improve the geological properties of soft soil using cement-based cementitious materials. However, the influence of the degree of fineness, precarbonation treatment, and substitution ratio of steel slag on the mechanical properties of stabilized soils with a cement-steel slag blend and the corresponding influence mechanism are still unclear. Herein, four types of steel slag powders (i.e., coarse steel slag (CSS), fine steel slag (FSS), fine steel slag under precarbonation treatment for 2 h (FSS-C-2h), and fine steel slag under precarbonation treatment for 18 h (FSS-C-18h)) were prepared in a laboratory and used as a substitute to cement at ratios of 10%, 20%, 30%, and 50%. Tests were conducted to evaluate the strength and performance of the cement—steel slag blend stabilized soils (SCSs), and the changes in the phase and morphology of the hydration products were observed. The results showed that the SCS with 10% FSS-C-18h had the highest unconfined compressive strength after curing for 60 d at 110% of stabilized soil with pure cement. The SCSs with CSS and FSS showed no expansion failure during the continuous boiling test over 60 d. The main hydration products for the SCSs were C—S—H and ettringite. Concerning long-term strength and stability, FSS-C-18h at a substitution ratio of 10% or 20% is recommended for achieving green and low-carbon stabilized soils.

Study on the finely ground steel slag as high reactivity blending materials of cement

Research on Composite Cement with Steel Slag and Fly Ash

Investigation on mechanical properties, durability and micro-structural development of steel slag blended cements

Study on preparation of steel slag cement with gas quenching steel slag

Preliminary study on gas quenching steel slag cement

Laboratory Preparation and Performance Characterization of Steel Slag Ultrafine Powder Used in Cement-Based Materials

Cementitious Properties of Super-Fine Steel Slag

Study on the Basic Properties of the Modified Steel Slag Cement

Factors Influencing the Properties of a Steel Slag Composite Cement

Mechanical properties and durability of concrete modified with steel slag and silica fume

Effect of Steel Slag on Burnality of Cement Raw Meal

Steel Slag/Precarbonated Steel Slag as a Partial Substitute for Portland Cement: Effect on the Mechanical Properties and Microstructure of Stabilized Soils

The Experimental Studies on the Prepartion of Steel Slag Cement by Gas Quenching Steel Slag

Influence of Activators on the Properties of Steel Slag Cementitious Materials

Influence of mechanical grinding on the cementitious properties of coarse particles in steel slag

Recent Development of Steel Slag Stability and Activating Activity

Utilization of Steel Slags in the Cement Industry

Research on Basic Properties of Cement by Adding Modified Steel Slag Mixed Fly Ash

Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size

Recycling of steel slag as an alkali activator for blast furnace slag: geopolymer preparation and its application in composite cement