Abstract:Using steel slag to replace natural coarse and/or fine aggregates to make concrete provides a multi-win solution in mitigating the environmental problems regarding huge depletion of natural aggregates and disposal of large amount of slag. On the other hand, the use of pozzolanic fillers, such as fly ash (FA) and silica fume (SF) could significantly improve the strength, stiffness and durability of concrete. However, there were very few research studies on the effect of pozzolanic fillers on the mechanical behaviour and durability of concrete containing steel slag. To fill up this research gap and promote the use of steel slag, a systematic and scientific experimental study was conducted, in which 29 concrete mixes with steel slag partially or totally replacing natural aggregates and FA/SF partially replacing cement in an equal volume were prepared. The slump, wet packing density (WPD), 7-, 28-, 91- and 182-day compressive strength and durability in terms of total charge passed and chloride ion’s penetration depth in rapid chloride permeability test were tested for all the specimens while the chemical composition of concrete were tested using X-ray diffraction. Test results revealed that the slump of steel slag concrete decreased due to the porous structure of slag. Besides, the use of steel slag improved the compressive strength of concrete. By adding SF to replace partial cement, the strength of steel slag concrete could be escalated further. At given composition of aggregates and filler type, the total charge passed and the chloride ion’s penetration depth of steel slag concrete decreased as the WPD increased due to the denser and impermeable microstructure of concrete that enhanced the resistance of chloride ion penetrability.

Cementitious Properties of Super-Fine Steel Slag

Effects on the Concrete Properties of That, the Natural Sand in Concrete is Replaced by the Blast Furnace Slag

Mechanical properties and durability of concrete modified with steel slag and silica fume

Influence of Steel Slag on Mechanical Properties and Durability of Concrete

Influence of Steel Slag on the Workability of Concrete

lnfluence of steel slag - superfine fly ash composite mineral admixture on the properties of concrete

Comparing Properties of Concrete Containing Electric Arc Furnace Slag and Granulated Blast Furnace Slag

Laboratory Preparation and Performance Characterization of Steel Slag Ultrafine Powder Used in Cement-Based Materials

Influence of mechanical grinding on the cementitious properties of coarse particles in steel slag

Effect of Steel Slag and Granulated Blast-furnace Slag on the Mechanical Strength and Pore Structure of Cement Composites

Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size

Steel Slag/Precarbonated Steel Slag as a Partial Substitute for Portland Cement: Effect on the Mechanical Properties and Microstructure of Stabilized Soils

Influence of Classified Steel Slag with Particle Sizes Smaller Than 20 Μm on the Properties of Cement and Concrete

A review of the application of steel slag in concrete

A Study On The Utilization Of Iron And Steel Industrial Solid Waste

Influence of Steel Slag Powder on Compressive Strength and Durability of Concrete

Study on the finely ground steel slag as high reactivity blending materials of cement

Effects of Steel Slag Powder as A Cementitious Material on Compressive Strength of Cement-Based Composite

Effect of fillers on the mechanical properties and durability of steel slag concrete

Feasibility of Preparing Steel Slag–Ground Granulated Blast Furnace Slag Cementitious Materials: Synergistic Hydration, Fresh, and Hardened Properties

The influence of steel slag with high Al 2 O 3 content on the initial hydration of cement