Abstract:This study assessed the impact of calcium silicate slag (CSS), an industrial by-product of aluminum extraction from fly ash, on the reaction kinetics, compressive strength, and efflorescence of one-part sodium carbonate-activated slag (SCS). Various proportions of CSS (0%, 10%, and 20%) were used to substitute for slag. The resulting performances were evaluated through chemical shrinkage, heat liberation, compressive strength, water absorption, phase composition (XRD and TG.), microstructures (BET and BSE-EDS), and simulated efflorescence test (partially and fully immersed in deionized water). The results indicate that the CSS possesses a porous structure. The addition of CSS impairs flowability but accelerates the development of chemical shrinkage and heat liberation. The incorporation of CSS promotes the transformation of gaylussite, leading to an increase in CASH and hydrotalcite formation. Consequently, a higher compressive strength and a lower water adsorption rate are achieved. 10% CSS addition improves the splitting tensile strength of SCS under conditions of partial immersion in the efflorescence test. However, a 20% CSS substitution exacerbates the formation of efflorescence products and reduces the splitting tensile strength. These observations are associated with residual alkalis in CSS, a lower Al/Si ratio of products, and an increase in capillary pores attributed to CSS particles. This paper demonstrates the feasibility of using alkaline solid waste for slag substitution and performance regulation in SCS and reveals the underlying mechanism. The prepared CSS-SCS binder exhibits much lower energy consumption and CO2 emission than traditional cement-based material, as determined by life cycle assessment.

Influence of mechanical grinding on the cementitious properties of coarse particles in steel slag

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Cementitious Properties of Super-Fine Steel Slag

Effect of glycerol mechanical excitation on the phase evolution and hydration activity of steel slag

Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size

Influence of Steel Slag on Mechanical Properties and Durability of Concrete

Influence of compositions of ground iron steel slag on its property

Effect of Steel Slag and Granulated Blast-furnace Slag on the Mechanical Strength and Pore Structure of Cement Composites

Study on the finely ground steel slag as high reactivity blending materials of cement

Mechanical properties and durability of concrete modified with steel slag and silica fume

Influence of Steel Slag on the Workability of Concrete

Laboratory Preparation and Performance Characterization of Steel Slag Ultrafine Powder Used in Cement-Based Materials

A Discussion on Improving Hydration Activity of Steel Slag by Altering Its Mineral Compositions.

The influence of steel slag with high Al 2 O 3 content on the initial hydration of cement

Influence of Classified Steel Slag with Particle Sizes Smaller Than 20 Μm on the Properties of Cement and Concrete

Mechanical performance, microstructure, and damage model of concrete containing steel slag aggregate

The influence of steel slag on the hydration of cement during the hydration process of complex binder

EARLY HYDRATION CHARACTERISTICS AND PASTE STRUCTURE OF COMPLEX BINDING MATERIAL CONTAINING HIGH-VOLUME STEEL SLAG

Effect of steel slag powder and stone powder by-product from manufactured sand on the mechanical properties and microstructure of cementitious materials

Influence of Steel Slag Powder on Compressive Strength and Durability of Concrete

Research on the Influence of Cellulose Fiber on the Performance of Steel Slag Cement Cementitious Materials