Abstract:Incorporating mine tailings with industrial waste residues (IWRs) is used to manufacture filling materials, which provides an eco-friendly disposal method for IWRs and alleviate their impact on the environment. In this study, steel slag (5, 10, 15, 20 wt%), fly ash (5, 10 wt%) and blast furnace slag (52, 57, 65, 74 wt%) as the precursor, carbide slag (16, 18, 20 wt%) and desulfurization gypsum (0, 2, 3 wt%) as the activator were reutilized to synthesize the IWRs-based binder for cemented ultrafine tailings backfill (CUFTB). Experimental tests were conducted to determine the setting time, hydration heat release, mechanical behavior, and microstructure characteristics. The hydration kinetics and solidification mechanism were expounded correspondingly. Results elucidate that the initial and final setting time of CUFTB are respectively 12.08–13.92 h and 16.92–20 h <24 h much longer than the transport time in pipeline and meets the operational requirements of mine site. Hydration process of CUFTB includes initial dissolution, induction, acceleration, deceleration, and decline stages. As the hydration proceeds, the initial stage of CUFTB is regulated by nucleation and crystal growth (NG), and gradually shifted to interactions at phase boundaries (I) or diffusion (D). The high content of CS (20 wt%) promotes the hydration reaction, resulting in the increase of heat release. IWRs-based binder hydrates to form calcite, ettringite, hydroaluminite, and gehlenite. Especially, the gel products are mainly C-A-S-H, C-(Al,Na)-S-H, C-(Al,K)-S-H with Ca/Si ratio <1, demonstrating a fundamental distinction from Portland cement. Under the bonding and padding of hydration products, tailings particles are solidified well. After curing of 28 days, CUFTB exhibit high UCS values exceeding 2.0 MPa, presenting an evident improvement of 26.70% ~ 39.20% compared to those made of Portland cement. These findings are referential for preparation of cemented paste backfill by reutilizing IWRs in mine filling field.

Recycling hazardous steel slag after thermal treatment to produce a binder for cemented paste backfill

Saturated Hydraulic Conductivity of Compacted Steel Slag-Bentonite Mixtures--a Potential Hydraulic Barrier Material of Landfill Cover.

Dual waste utilization in cemented paste backfill using steel slag and mine tailings and the heavy metals immobilization effects

Utilization of steel slag for cemented tailings backfill: Hydration, strength, pore structure, and cost analysis

Towards understanding the hydration and hardening properties of the cemented paste backfill with a green steel-slag binder

Recycling of steel slag as an alkali activator for blast furnace slag: geopolymer preparation and its application in composite cement

Steel Slag/Precarbonated Steel Slag as a Partial Substitute for Portland Cement: Effect on the Mechanical Properties and Microstructure of Stabilized Soils

Recycling multisource industrial waste residues as green binder for cemented ultrafine tailings backfill: Hydration kinetics, mechanical properties, and solidification mechanism

Industrial by-products-derived binders for in-situ remediation of high Pb content pyrite ash: Synergistic use of ground granulated blast furnace slag and steel slag to achieve efficient Pb retention and CO 2 mitigation

Greener phosphogypsum-based all-solid-waste cementitious binder with steel slag activation: Hydration, mechanical properties and durability

Recycling of steel slag powder in green ultra-high strength concrete (UHSC) mortar at various curing conditions

Durability and heavy metals leaching behavior of cemented paste backfill using chemical activated binary slag as binder under sulfate attack

Preparation and performance of composite activated slag-based binder for cemented paste backfill

Production of a new type of cemented paste backfill with solid waste from carbide slag, soda residue, and red mud: mechanism, optimization, and its environmental effects

Study on the properties of alkali-activated ferrochrome slag paste filling materials prepared from multiple industrial solid wastes

Recycle of steel slag as cementitious material and fine aggregate in concrete: mechanical, durability property and environmental impact

Properties of Cemented Filling Materials Prepared from Phosphogypsum-Steel Slag-Blast-Furnace Slag and Its Environmental Effect

Different carbon treatments for steel slag powder and their subsequent effects on properties of cement-based materials

Bacteria fixing CO2 to enhance the volume stability of ground steel slag powder as a component of cement-based materials aiming at clean production

Study on Effects of Refining Slag on Properties and Hydration of Cemented Solid Waste-Based Backfill

Preparation and Characterization of Low-Carbon Cementitious Materials Based on Soda-Residue-Activated Ground Granulated Blast-Furnace Slag: A Case Study on Cemented Paste Backfills