Abstract:Textile wastewater contains many organic compounds and colors that affect aquatic life and human health when discharged into the environment. High coloration due to excess dyes entering the wastewater causes coloration to the receiving water stream, affects the photosynthesis process of aquatic species, and adversely affects the landscape. SnO2-based electrodes have been extensively used in electrochemical water treatment, but their low durability decreases the pollutant treatment ability. Therefore, it is necessary to add another stable oxide to improve the performance and stability of SnO2 electrodes. This study aims to fabricate Ti/SnO2-Nb2O5 electrodes for the textile wastewater treatment using the electrochemical oxidation method. Different molar ratios of SnO2:Nb2O5 coating were prepared using the sol-gel method and then coated on the Ti substrates for calcination in 60 min at 500 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer Emmett Teller (BET), and cyclic voltammetry (CV) were used to determine the surface and electrochemical properties of Ti/SnO2-Nb2O5 electrodes. The SEM images show that SnO2-Nb2O5 electrode surfaces have the appearance of typical cracking structures of mixed metal oxides electrodes. The XRD spectrum show the SnO2 peaks of facet (110), (101), (200), (301), (321) and Nb2O5 peaks of facet (001), (002), (100), (101), (102) on Ti substrates. Furthermore, the specific surface area of the Ti/SnO2-Nb2O5 electrode ranges from 37.354 m2/g (SnO2:Nb2O5 = 9:1) to 71.885 m2/g (SnO2:Nb2O5 = 1:9). The electrochemical properties of SnO2:Nb2O5 electrodes showed high oxygen, chlorine evolution potential and high organic pollutant degradation in textile wastewater with COD removal at 83 %, decolorization at 74 % and the generation of many free radicals such as HO•, H2O2, O3, Cl2. The results demonstrate that the Ti/SnO2-Nb2O5 electrode with the mole ratio of 3:7 is the best in textile wastewater treatment with the longest service life (39 h).

Preparation of Ti/SnO2-Sb2O5-CuO Electrode and Its Application in NH3-N Removal in Simulated High Concentration Salt Dyeing Wastewater

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Fabrication of high performance Ti/SnO2-Nb2O5 electrodes for electrochemical textile wastewater treatment

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

Study on Ammonia-Nitrogen Removal in Wastewater Using Electrochemical Method

Ammonia oxidation by in-situ chloride electrolysis in etching wastewater of semiconductor manufacturing using RuSnO x /Ti electrode: Effect of plating mode and metal ratio

Electrodeposition of CdS-TiO2 for the Photocatalytic Degradation of Ammonia-Nitrogen Wastewater

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation

Process Optimization of Electrochemical Oxidation of Ammonia to Nitrogen for Actual Dyeing Wastewater Treatment

The Improvement on Total Nitrogen Removal in Nitrate Reduction by Using a Prepared CuO-Co3O4/Ti Cathode

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Sulfur Induced Surface Reconfiguration of Ni1Cu3-S-T/CP Anode for High-Efficiency Ammonia Electro-Oxidation

Thermal decomposition based fabrication of dimensionally stable Ti/SnO2–RuO2 anode for highly efficient electrocatalytic degradation of alizarin cyanin green

New hierarchical Ti/SnO 2 -PbO 2 /CNT electrode: Enhanced electrochemical properties and improved electrochemical oxidation towards various real wastewaters

A new electrochemical method for simultaneous removal of Mn2+and NH4+-N in wastewater with Cu plate as cathode

Electrocatalytic Degradation of Bromocresol Green Wastewater on Ti/Sno2-Ruo2 Electrode

Efficient ammonia removal promoted in a bifunctional system constructed with NiCu–S/DSA electrodes

Preparation of a novel Ni/Sb co-doped Ti/SnO2 electrode with carbon nanotubes as growth template by electrodeposition in a deep eutectic solvent

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

Synthesis and characterization of Sb2O5-doped Ti/SnO2-IrO2 anodes toward efficient degradation tannery dyes by in situ generated oxidizing species