Abstract:Textile wastewater contains many organic compounds and colors that affect aquatic life and human health when discharged into the environment. High coloration due to excess dyes entering the wastewater causes coloration to the receiving water stream, affects the photosynthesis process of aquatic species, and adversely affects the landscape. SnO2-based electrodes have been extensively used in electrochemical water treatment, but their low durability decreases the pollutant treatment ability. Therefore, it is necessary to add another stable oxide to improve the performance and stability of SnO2 electrodes. This study aims to fabricate Ti/SnO2-Nb2O5 electrodes for the textile wastewater treatment using the electrochemical oxidation method. Different molar ratios of SnO2:Nb2O5 coating were prepared using the sol-gel method and then coated on the Ti substrates for calcination in 60 min at 500 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer Emmett Teller (BET), and cyclic voltammetry (CV) were used to determine the surface and electrochemical properties of Ti/SnO2-Nb2O5 electrodes. The SEM images show that SnO2-Nb2O5 electrode surfaces have the appearance of typical cracking structures of mixed metal oxides electrodes. The XRD spectrum show the SnO2 peaks of facet (110), (101), (200), (301), (321) and Nb2O5 peaks of facet (001), (002), (100), (101), (102) on Ti substrates. Furthermore, the specific surface area of the Ti/SnO2-Nb2O5 electrode ranges from 37.354 m2/g (SnO2:Nb2O5 = 9:1) to 71.885 m2/g (SnO2:Nb2O5 = 1:9). The electrochemical properties of SnO2:Nb2O5 electrodes showed high oxygen, chlorine evolution potential and high organic pollutant degradation in textile wastewater with COD removal at 83 %, decolorization at 74 % and the generation of many free radicals such as HO•, H2O2, O3, Cl2. The results demonstrate that the Ti/SnO2-Nb2O5 electrode with the mole ratio of 3:7 is the best in textile wastewater treatment with the longest service life (39 h).

Thermal decomposition based fabrication of dimensionally stable Ti/SnO2–RuO2 anode for highly efficient electrocatalytic degradation of alizarin cyanin green

Constructing Dimensionally Stable TiO2 Nanotube Arrays/sno2/ruo2 Anode Via Successive Electrodeposition for Efficient Electrocatalytic Oxidation of As(III)

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Ti/PbO2-Sm2O3 composite based electrode for highly efficient electrocatalytic degradation of alizarin yellow R

Electrocatalytic Degradation of Bromocresol Green Wastewater on Ti/Sno2-Ruo2 Electrode

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

Dimensionally Stable Ti/SnO2-RuO2 Composite Electrode Based Highly Efficient Electrocatalytic Degradation of Industrial Gallic Acid Effluent.

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Synthesis and characterization of Sb2O5-doped Ti/SnO2-IrO2 anodes toward efficient degradation tannery dyes by in situ generated oxidizing species

Robust Self-Supported SnO2-Mn2O3@CC Electrode for Efficient Electrochemical Degradation of Cationic Blue X-GRRL Dye

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation: Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Fabrication of high performance Ti/SnO2-Nb2O5 electrodes for electrochemical textile wastewater treatment

Effective sonocatalytic degradation of organic dyes by using Er 3+:YAlO3/TiO2-SnO2 under ultrasonic irradiation

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

WITHDRAWN: A three-step electrochemical method designed for the production of nickel- and platinum-doped TiO(2) multi-nanoporous thin-film electrodes: An application in the degradation of acid red G

Ti/CoTiO 3 -TiO 2 for Efficient Degradation of Refractory Organic Dyes: Synthesis, Characterization, and Electrocatalytic Properties

Enhanced performance of an Al-doped SnO2 anode for the electrocatalytic oxidation of organic pollutants in water

Preparation of Porous Ti/RuO2-IrO2@Pt, Ti/RuO2-TiO2@Pt and Ti/Y2O3-RuO2-TiO2@Pt Anodes for Efficient Electrocatalytic Decomposition of Tetracycline

Pb-0.6%Sb/α-PbO2/β-PbO2-MnO2 Electrode Electrodeposited In Methanesulfonic Acid With Application To The Electrocatalytic Degradation of AYR Wastewater

Enhanced Electrochemical Oxidation of Synthetic Dyeing Wastewater Using SnO2-Sb-doped TiO2-coated Granular Activated Carbon Electrodes with High Hydroxyl Radical Yields