Abstract:Textile Research Journal, Ahead of Print. The traditional tension control method with tension as the control target is to uniformly control multiple warp beams and has low control accuracy. Simultaneously, it is difficult to install an independent sensor for a single warp beam to achieve a closed-loop control, due to the space limitation. Combined with the theoretical model, this paper proposes a novel method to achieve the closed-loop unwinding tension control of warp beams by taking the unwinding length as the control target and using the self-developed turns measuring device. First, the dynamic model between different factors and unwinding tension was established in this study. Furthermore, the influence of unwinding radius, unwinding speed and winding density on the tension was investigated to clarify the fluctuation mechanism. Based on these, simulation experiments were conducted for verifying the control effect of the proposed method. The results showed that the proposed single warp beam unwinding tension control method can achieve constant tension throughout the unwinding process, which is superior to the empirical open-loop control method that adjusts the tension according to the linear proportional change of the braking torque. Meanwhile, it has the similar control effect as the ideal closed-loop tension control method, maintaining stability under different reference tensions and disturbances. In addition, the proposed multiple warp beams unwinding tension control method also outperformed the traditional unified tension control method. Our measuring device can be easily installed on the single warp beam for control, resulting in consistent tension between multiple warp beams. Therefore, the proposed methods have a certain control effect and application value.

Damping Technology Used in Nonwoven Needle Loom

Precise Control of Needle Position of the High-Speed Flat Sewing Machine

Preliminary Study on the Reduction of Vibration and Noise of the Mill

Particle Damping for Vibration and Noise Reduction

Analysis and Trend of Damping and Noise-Reduction Material for High-Speed Rail Transportation

Vibration Damping and Noise Reduction of a New Non-Newtonian Fluid Damper in a Washing Machine

Sound absorption coefficient analysis and verification of weft-knitted spacer fabrics for noise reduction application

Vibration characteristics of wallboard and four-bar linkage beating-up mechanism of air-jet loom

Study on Relaxing Effect of Easing Device in Air Jet Looms to Warp Stretching

Experimental Investigation on the Noise Reduction of an Axial Piston Pump Using Free-Layer Damping Material Treatment

New Development of Vibration Drilling Technology——Electric Hot Vibration Drilling

Difficulty and Resolving Measures in Producing Heavy Composite Fabric

Transmission and Dissipation of Vibration in a Dynamic Vibration Absorber-Roller System Based on Particle Damping Technology

New Development of the Spunbonded Nonwoven Technology

Dynamic tension control for warp beams on sizing machine based on unwinding length monitoring

Revival of cultural textile arts: creation of innovative weaving technology for fabricating traditional Chinese non-fixed four-warp leno

Coupling Characteristics of Needles and Backing Cloth During the Carpet Tufting Process

Development of research on damping of fiber reinforced composite - a review

Research on Control System of WBS for Loom Weft

Optimization and Design of Yarn Suction Duct on Automatic Cone Winding Machine