Abstract:Performing pyrolysis studies on polymer matrix composites, at rates that match the elevation of temperature met during a fire exposure, is of primary interest for the aeronautics field. In this study, one aspect of the material response under flame is investigated, which is the thermal degradation of the polymer matrix. Thermogravimetric analyses (TGA), up to five hundred Kelvins per minute, are performed on polyphenylene sulfide (PPS) and carbon fiber-reinforced polyphenylene sulfide (CF/PPS), to mimic the heating rate conditions commonly met during a fire. The influence of the heating rate regarding the PPS decomposition signature is discussed from both the residual mass and the characteristic temperature corresponding to the maximum rate of degradation. Then, the PPS thermal decomposition features are compared with those of several thermoplastic polymers and thermoplastic–based composites. It is observed that PPS stands out when subjected to fast elevation of temperature. Indeed, its amount of «char», obtained after thermal degradation, increases with the heating rate. To investigate possible mechanistic causes behind this singular behavior, the influence of the heating rate on the degradation mechanisms occurring into PPS and CF/PPS is investigated. TGA coupled with Fourier transform infrared spectroscopy (FTIR) is used to obtain the decomposition products. The results plaid for the coexistence of two main degradation mechanisms, being the random chain–scission and the depolymerization. Nevertheless, when the heating rate increases, the random chain–scission seemingly becomes the predominant mechanism along the whole process.

Study on the Thermal Stability of PA6 Fibers

Thermal Stability of Aromatic Polyesters Prepared from Diphenolic Acid and Its Esters

A Kinetic Study of the Thermal Degradation of Nylon-6/Attapulgite Nanocomposites

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Thermal–oxidative Degradation and Accelerated Aging Behavior of Polyamide 6/epoxy Resin‐modified Montmorillonite Nanocomposites

Preparation of a Novel Stabilizer and Its Thermal‐oxidative Stabilization Effect on Polyamide 6

Insights on the processing and thermal degradation kinetics of PA6/PE‐g‐AA blends

Investigation of thermal degradation and flammability of polyamide-6 and polyamide-6 nanocomposites

An Evaluation of the Beneficial Effects of Polyamide 6's Thermal Stabilization by Ferric Chloride Complexation as a Novel Carbon Fiber Precursor

High-temperature thermal oxidation of composites based on isotactic polypropylene with aliphatic polyamide 6/66

Phase stability and melting behavior of the α and γ phases of nylon 6

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Synthesis and thermal degradation mechanism of a semi-aromatic copolyamide from renewable sources

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Understanding the Thermal Degradation Mechanism of High-Temperature-Resistant Phthalonitrile Foam at Macroscopic and Molecular Levels

Thermo-compression forming of flax fibre-reinforced polyamide 6 composites: influence of the fibre thermal degradation on mechanical properties

Thermal decomposition study of carbon fiber-reinforced polyphenylene sulfide at high heating rates met under fire exposure

Structure, morphology, thermal stability and carbonization mechanism studies of electrospun PA6/Fe-OMT nanocomposite fibers

Spin-Trapping Analysis of the Thermal Degradation Reaction of Polyamide 66

Study on the structural evolution of polyacrylonitrile fibers in stepwise heat treatment process and its relationship with properties