Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Investigation of thermal degradation and flammability of polyamide-6 and polyamide-6 nanocomposites

A Kinetic Study of the Thermal Degradation of Nylon-6/Attapulgite Nanocomposites

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

Thermal Degradation and Flammability Properties of HDPE/EVA/C60 Nanocomposites

Thermal–oxidative Degradation and Accelerated Aging Behavior of Polyamide 6/epoxy Resin‐modified Montmorillonite Nanocomposites

Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites

Flame retardant polyamide 6/nanoclay/intumescent nanocomposite fibers through electrospinning

Preparation and Combustion Properties of Flame Retardant Nylon 6/Montmorillonite Nanocomposite

PA-6 and EVA alloy/clay nanocomposites as char forming agents in poly(propylene) intumescent formulations

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Influences of organic montmorillonite on the combustion behaviors and thermal stability of polyamide 6/polystyrene blends

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

Evaluation of the thermal degradation of PC/ABS/montmorillonite nanocomposites

Study on Crystallization, Thermal and Flame Retardant Properties of Nylon 66/organoclay Nanocomposites by in Situ Polymerization

Investigation of Thermal Decomposition of Polymer Nanocomposites with Different Char Residues

Preparation and combustion properties of flame retarded polypropylene–polyamide-6 alloys

Preparation and Properties of Halogen-Free Flame-Retarded Polyamide 6/organoclay Nanocomposite

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

AMMONIUM SULFAMATE FLAME RETARDED POLYAMIDE 6： MORPHOLOGY AND THERMAL DEGRADATION