Abstract:In this study, the eccentric compression properties of L-shaped columns fabricated using concrete-filled steel tubes connected by double vertical steel plates (LCFST-D columns) were experimentally studied. The eccentricity was used as a parameter to analyse the deformation development, failure mode and ultimate carrying capacity of these columns. The test result indicated that the LCFST-D columns had a good ductility and bearing capacity. Compared with LCFST columns under identical eccentricity, the LCFST-D columns had a higher bearing capacity, over 20%, and significantly higher ductility. The double vertical steel plates filled with concrete efficiently improved the collaboration among the monocolumns, strengthened their integrity and fully utilized the material properties. The test study used a finite element model to analyse the entire deformation process of LCFST-D columns and the interaction among monocolumns to determine the effects of the eccentricity, vertical steel plate thickness, and steel pipe thickness on the performance of these columns under eccentric compression. The test result showed that overall bending and buckling were the failure modes of the LCFST-D columns, during which the three monocolumns bulged first. The eccentricity was a key factor that affected the eccentric load bearing capacity of these columns. Increasing the eccentricity notably decreased the bearing capacity of the columns. Increasing the steel pipe thickness delayed the local buckling of a monocolumn, which increased its bearing capacity. Based on this analysis, a formula to predict the eccentric compression capacity of LCFST-D columns was proposed. The error between calculation results and test data was less than 10%, and the accuracy was verified by the test results.

Experimental Study on Seismic Behavior of Concrete-Filled Steel T-section and L-section Columns

Low Cyclic Fatigue Performance of Concrete-Filled Steel Tube Columns

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Post-Earthquake Fire Resistance of Circular Concrete-Filled Steel Tubular Columns

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

Experimental Study on Seismic Behavior of High-Strength Concrete-Filled Steel Tube Composite Columns

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Seismic Behaviors of Concrete-Filled T-Shaped Steel Tube Columns

EXPERIMENTAL RESEARCH ON CONCRETE-ENCASED COMPOSITE COLUMNS WITH L-SHAPED STEEL SECTIONS

Experimental Study on Seismic Behavior of Concrete Filled Square Steel Tubular Columns to Low-Cycle Reversed Horizontal Load

Experimental Investigation of the Seismic Behavior of Reinforced Concrete Beam to Concrete-Filled Steel Tube Column Connections

Experimental research on the seismic performance of a laminated column with steel tube filled with high-strength concrete

Performance of Special-Shaped Concrete-Filled Square Steel Tube Column under Axial Compression

Experiment study of reinforced concrete filled steel tubular columns subjected to axial compression

Experimental Research on Seismic Behavior of Concrete Filled CHS and SHS Columns and Steel Beam Planar Frames

Experimental and Simulation Studies on the Seismic Performance of I-section Steel-Concrete Composite Columns

Experimental Studies On The Strength With High Slenderness Ratio Concrete Filled Steel Tubular Columns

EXPERIMENTAL STUDY ON THE BEHAVIOUR OF L-SHAPED COLUMNS FABRICATED USING CONCRETE-FILLED STEEL TUBES UNDER ECCENTRIC LOADS

Experimental study on the seismic performance of composite columns with an ultra-high-strength concrete-filled steel tube core

Experimental Studies on Seismic Behaviors of Connections with Anchorages for Concrete-Filled Square Steel Tubes

Experimental Study on the Seismic Behavior of High Strength Concrete Filled Double-Tube Columns