EXPERIMENTAL RESEARCH ON CONCRETE-ENCASED COMPOSITE COLUMNS WITH L-SHAPED STEEL SECTIONS

Yunfeng Xiao,Zhengtao Zhou,Yiguang Chen,SiQian Jin,Lei Zeng

2016-01-01

Abstract:To study seismic behavior of concrete-encased composite columns with unsymmetrical steel cross-sections, cyclic loading tests were carried out on 12 columns with L-shaped section steel. The test parameters included shear span ratio, axial compression level, stirrup ratio and presence of cross tie. Mechanical process, failure mode, hysteretic characteristics, skeleton curves, ductility and energy absorption capacity were taken into comparison. The result indicates that concrete-encased composite columns with unsymmetrical steel section possess good seismic performance under constant axial compression and cyclic horizontal load. The failure mode contains bending failure, shear-bond failure, shear compression failure and shear-composition failure. Unsymmetrical phenomenon of positive and negative hysteresis loop is shown evidently. Span ratio has a great influence on failure mode and shear-composition failure usually takes place in columns with L-shaped steel section. The ductility performance decreases with increasing of axial compression level, which is more obvious for columns with L-shaped steel section. As stirrup ratio increases, ductility and bearing capacity of columns are improved greatly, and energy absorption capacity after yielding is enhanced. However, these improvements are not evident for L-shaped steel section columns with smaller span ratio. Cross tie can enhance ultimate bearing capacity, and lower strength attenuation and stiffness degradation on the later loading stage, which enhances deformation capacity of L-shape steel section columns greatly.