Abstract:The traditional tower‐style building (TTSB) is an innovative structural form constructed in modern cities imitating the overall appearance of ancient timber pagodas, and it is an extraordinarily cultured high‐rise construction. The limited stipulations for high‐rise TTSBs in the seismic design code pose challenges in assessing the reliable performance of the unique structure subjected to severe earthquakes. This paper presents the shaking table test and numerical analyses of a 1/15‐scale 13‐story TTSB specimen with an integral tower height of 5.36 m, which is a steel frame‐braced core‐tube structure consisting of seven bright floors (built‐out stories evident from the outside, BF) and six dim floors (built‐in stories not apparent from the outside, DF), with transition columns and stiffening trusses around the exterior perimeter. The experimental results showed that the tested tower‐style building had excellent seismic performance and reliable structural integrity. It only experienced minor damage when subjected to extremely high‐intensity motions. The interstory drift, dynamic strain, and floor acceleration response of the core‐tube region with eccentric steel braces were more significant under severe excitation than those with cross‐centered symmetric steel braces. The vertical reaction increased at the upper floor of the tower under vertical acceleration, and differences in the dynamic response of the middle and upper floors were much more apparent after the test. Moreover, 3D numerical simulation models of the tested tower were established and validated against the test responses. Successively, the validated numerical model was used to investigate the influence of the transition column at different floors on the peak interstory drift response and the relevant strain distribution, and the proposal for a proper position of the transition column was recommended at the end.

Shaking Table Testing Study on a High- Rise Building Model Structure with Serious Irregularity

Shaking table test for a mid-highrise big-bay RC frame model with special-shaped columns

Shaking table test of a complex transfinite structures with plane irregularity

Shaking table test of RC frame-shear wall structure with specially shaped columns

Shaking Table Model Test of Jinan Olympic Stadium

Shaking Table Test and Finite Element Analysis of Low-rise Cold-formed Thin-walled Steel Residential Buildings

Shaking Table Test of RC Frame of Short-Pier Shear Wall Structure with Special-Shaped Columns

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building

Shaking Table Test on High-Rise Isolated and Non-Isolated Structures

Shaking table test and numerical analysis of an asymmetrical twin‐tower super high‐rise building connected with long‐span steel truss

Shaking table test and oretical analysis on RC frame-shear wall structures with special-shaped columns

Shaking Table Test on the Structural Model of Beijing New Poly Plaza

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

A Substructure Shaking Table Test for Reproduction of Earthquake Responses of High‐rise Buildings

Shaking table model test analysis of gymnasium building with large span

Shake table tests on the traditional column-and-tie timber structures

Design method of small scaled shaking table test structural model lacking artificial mass

Shaking Table Test and Dynamic Response Prediction on an Earthquake-Damaged RC Building

Shaking Table Model Test And Fe Analysis Of A Reinforced Concrete Mega- Frame Structure With Tuned Mass Dampers

Shaking table test and evaluation of a novel high-rise large span concrete cassette structure

Shaking table tests of Chinese traditional wood building and light wood framed building