Interfacial shear behaviour of GFRP box-concrete composite girders under low temperature
Zhe Wang,Jian Xie,Xudong Qian,Jia-Bao Yan
DOI: https://doi.org/10.1016/j.engstruct.2024.118242
IF: 5.582
2024-05-25
Engineering Structures
Abstract:A novel shear connection system for GFRP box-concrete composite girder was proposed and experimentally and analytically investigated in this paper. The novel connection system consists of T-bolts and sand coating, and can be easily installed at the GFRP box section with closed shape. The proposed connection system can improve the slip stiffness of GFRP box-concrete interface, and provide sufficient shear resistance and ductility. The effects of low temperatures ( T = 20, −30, −60, and −80 °C), longitudinal spacing of T-bolts ( S L =100, 150, and 200 mm), aspect ratio ( h ef / d =3.2, 5.2, and 7.2), and GRRP-concrete interface type ( IT =combined connectors with T-bolts and sand coating, sand coating, T-bolts, and blind-bolts) on interfacial shear behaviours were evaluated through twenty-four push-out tests. Failure modes and load-slip/strain curves at different temperatures were plotted. Experimental results showed that decreasing temperature from 20 to − 80 °C increased the shear resistance of sand coating and slip stiffness of push-out testing specimens, but exhibited little effects on their ultimate shear resistances. Analytical equations to predict the ultimate shear resistances of push-out testing specimens have been developed and validated by the test results. Besides, load-slip modes for specimens with different interface types were also proposed with good accuracy.
engineering, civil