Mechanism Analysis and Design of Novel Tapered Iron Bolt Shear Connectors

Zhu Yan,Ju Chen,Madhup Pandey

DOI: https://doi.org/10.1016/j.istruc.2024.107708

IF: 4.1

2024-01-01

Structures

Abstract:An innovative demountable tapered iron bolt shear connector (TIBC) for steel-concrete composite beams has been proposed and tested by push-out test in previous research. In this study, finite element (FE) model of push-out test specimens using TIBC has been developed to further investigate the load transfer mechanism. The accuracy of the proposed FE model is validated by comparing FEA results with test results. Parametric study has been performed using the verified FE model. Effect of parameters including diameter and length of bolt, material strength of bolt and tapered iron plug (TIP), size of TIP as well as compressive strength of concrete on the shear capacity and load-slip relationship of push-out specimens are investigated. It was found that the size of the tapered iron plug must be proportionate to the bolt diameter to avoid the concrete crush failure. It is also shown that the aspect ratio of bolt and the yield strength of the TIP have minor impact on the load-slip relationships of TIBC and the concrete damage. Critical size of the TIP has been proposed for two different failure models, namely concrete crushing failure and bolt shear failure. Practical design recommendations in algebraic form have been proposed based on the FEA results. Additionally, a severe damage criterion for concrete in steel-concrete beam has been proposed.