Design on Seismic Strengthening of an Office Building

张惠英,吴朋,王浩

2001-01-01

Abstract:An office building is a typical brick masonry structure which was built in the mid 1950's in Beijing.The structural design on seismic strengthening against 8° earthquake intensity and modification are introduced.In addition,this building is added with modem equipments,such as central air-conditioning system.

What problem does this paper attempt to address?

Seismic Design for Super-highrise Building Structure

Yong He

2007-01-01

Abstract:This paper presents the keypoints for the structural design of non-regular plan and non-regular vertical structures based on a practical engineering example. Seismic analysis is conducted to evaluate the structural behavior of the building by two kinds of suitable software.
SEISMIC DESIGN OF BUILDING A OF MINDA PLAZA

Li Yuyu,Xiao Yan,Cao Dayan,Liu Tao

2013-01-01

Abstract:The building A of Minda Plaza was adopted the SRC frame and shear wall structural system.Due to the functional need,the beams were deleted from the spindle-shape outmost frames,where the columns were arranged in an inclined orientation with the principal floor axes.The transfer story was of particular challenge,thus a new type of composite beam with encased built-up double steel sections was designed.The satisfactory performance of the new structural system was validated through quasi-static loading tests and shake-table test.The structure was exhibited to follow the failure mechanism of "strong columns,weak beams,stronger transfer beams,and the strongest connection".The steel reinforced concrete transfer beams with double-steel sections had satisfactory bearing capacity and energy dissipation capacity,suitable to meet the requirements of functional limitation.
THE STRUCTURAL DESIGN FOR ADDING TWO MORE STORIES TO AN EXISTING MASONRY STRUCTURE

高剑平,潘景龙,王凤来,唐岱新

DOI: https://doi.org/10.3969/j.issn.1001-6864.2003.05.011

2003-01-01

Abstract:A presentation is given of the salient design features of a complex building.The reinforced concrete(RC) frame structure supporting a two-storey office block spans the existing four-storey brick masonry building,and they are interlocked by specially designed junctions,which disconnect the masonry with the frame completely in elevation.This allows the free settlement of the frame that otherwise would have involved transferring the vertical load,whereas in the horizontal direction,they are joined as a unit to resist lateral earthquake action,the design and construction of the junctions played a key role in realizing the new design concept.As a result,the seismic performance of the complex building was improved,and the seismic potential of strengthened wall panels was utilized fully,needless to introduce new lateral load-resisting elements.Apart from those merits,construction duration was also shortened.
Structural design for Hangzhou Wanyin International Building

Liu Zhonghua,Xiao Zhibin,Yin Xiong,Ma Yue

2010-01-01

Abstract:The structural design features of Hangzhou Wanyin International Building were introduced,including the structural system determination,structural arrangement characteristics and seismic analysis,structural design measures,design of the special part,construction process control and so on.Performance target was proposed and results were compared.Difference settlement was analyzed.The issue should be noted and the corresponding measures for the design were presented.
Study on Seismic Performance of Reinforced Concrete Masonry High-Rise Building

Xujie Sun,Hou Zhang,Dagang Lu,Fenglai Wang

DOI: https://doi.org/10.4028/www.scientific.net/amm.166-169.2164

2012-01-01

Applied Mechanics and Materials

Abstract:The design process of the 100 m high reinforced concrete masonry building in China was firstly presented, deformation check calculation under earthquake action by mode-superposition response spectrum method and time-history analysis method were detailed and deformation under wind load was also checked. Then elastic-plastic deformation under earthquake action was checked by time-history analysis method and pushover analysis method with both under uniform load and reverse triangle load. The conclusion is construct 100 m high office building built in Fortification intensity 6 by reinforced concrete masonry is feasible. Then the building was redesigned as built in fortification 7, the same check was performed as that have been done in fortification 6, it is feasible too.
Rehabilitation and Strengthening Design of a Great Courtroom and Office Building

Yang Jun,Zhang Huiying,Ye Zhiman,Li Hui,Yan Feng

2007-01-01

Abstract:The key issues of rehabilitation and strengthening design of a great courtroom and office building are introduced. To satisfy the requirement of current technical specification for concrete structures of tall building and code for seismic design of building, several treatments are applied to the structure designed and built before, including adding pilasters to decrease the height-width ratio, adding shear walls to decrease the maximum spacing between shear walls and enlarging the section of columns to decrease axial compression ratio. The design of manual hole digging pile and steel cantilevered-structure of roof is also instructive for the relevant project.
Seismic design on ultra-limit high-rise building for Zhongyu International Plaza

Yu Jinhua,Xiao Zhibin,Liu Zhonghua,Gan Gang

DOI: https://doi.org/10.19701/j.jzjg.2013.02.002

2013-01-01

Abstract:A frame-core wall hybrid system was applied in Zhongyu International Plaza,which exceeds the limit of the code-specification with the height of 204m.In order to guarantee the ductility of the structure,the performance-based seismic design method was adopted and its performance objectives were proposed.Through elastic analysis under frequent earthquake,elastic analysis of critical components under medium earthquake and elastic-plastic dynamic time-history analysis under rare earthquake,seismic performances of the structure and components were verified based on bearing capacity and deformation results under different levels.Structural analysis was carried out by three different calculation software to enhance the reliability of the structural design.The results indicate that the performance objectives can be well realized by proper design measures,and the structure is safe and reliable.
Structural Analyses and Design of Seismic Retrofitting with Energy Dissipation Dampers for Beijing Hotel and Other Key Buildings in Beijing

WANG Yayong,XUE Yantao,Ou Jinping,WU Bin,LONG Xu,Cheng Maokun,WANG Zhigang

DOI: https://doi.org/10.3321/j.issn:1000-6869.2001.02.006

2001-01-01

Abstract:The energy dissipation technology has been used for seismic retrofitting of the key buildings in Beijing such as the Beijing Hotel, the Beijing Railway Station, the Revolution and History Museum of China and the Beijing Exhibition Hall. The seismic structural analyses and design are carried out by means of response spectrum and time history methods for the west wing of Beijing Hotel. Two steps are taken: firstly, the response specturm analyses and time history analysis approaches are used to calculate the strength and deformation of the structure under minor and major earthquake design levels respectively, then the energy dissipation dampers (Jarret model made in France) with a specified hysteresis model are used in the principal and detailed design of retrofitting and secondly, a nonlinear analysis program based on Wilson θ approach is developed to make the time history analysis for the structure equipped with dampers. The elastoplastic, deformation of the structure, the buckling of steel bracing, the nonlinear features of the rigidity and damping of the energy dissipation bracing have also been considered in the seismic design for the building structure.
Structural selection and design analysis of a super high-rise office building

Xiaomeng Zhang,Wenting Liu,Yongxin Li,Songlin Yang,Xiang Liu

DOI: https://doi.org/10.1088/1755-1315/510/5/052004

2020-06-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract A super high-rise building, with a height of 238 meters, 4 floors underground and 50 floors above the ground, exceeds the Class B height limit of the specification, and belongs to an ultra-high over-limit structure. Through the selection of different structural systems, its structural system is determined as the frame core tube structure. This structure uses YJK, SATWE, PKPM-SAUSAGE for structural analysis, uses performance-based methods for seismic design, and the weak parts of the structure are strengthened accordingly. Structural analysis mainly includes elasticity analysis of small earthquakes, elastic time history analysis of small earthquakes, elastic and inflexion analysis of moderate earthquakes, inflexibility analysis of large earthquakes and elastoplastic time history analysis of large earthquakes.
Design of base isolation for a high-rise office building in Suqian

Du Dongsheng,Wang Shuguang,Liu Weiqing,Sun Zhen

2010-01-01

Abstract:The design method of hybrid base isolation was applied to an office building in Suqian,which is a region of high earthquake intensity.In China,there is no specific design basis for isolated technique application in high-rise buildings.Performance-based seismic design method was applied to this building.In order to reach the setting target of seismic performance,combination form was adopted in isolation floor composed of rubber bearing and viscous damping.Analysis results prove the stabilized operating state of isolation floor,the obvious decreasing in seismic response of upper structure,as well as the satisfaction for the design requirements.
Earthquake resistant behavior on seismic strengthening of typical rural brick-wood structure in Beijing

Mansheng Wang,Xiaomin Zhao,Xiaodong Ji,Zuozhou Zhao

DOI: https://doi.org/10.11835/j.issn.1674-4764.2015.06.009

2015-01-01

Abstract:Comparision of resistant behavior was made between two kinds of seismic strengthening methods for the single-story brick-wood structure with brick columns representative of existing rural buildings in Beijing, through shaking table tests on large-scale models. According to the seismic damages of unreinforced model test,the seismic strengthening measures were proposed,which included:(1)addition of a concrete window frame to increase the lateral stiffness of front longitudinal wall,(2)strengthening the walls,brick columns and under-window walls by using cement mortar to increase the carrying and deformation capacity,(3)addition steel ring beam to enhance the robustness of the structure.The results of testing damage and the dynamic characteristics parameters,such as,dynamic frequency,structural damping,acceleration dynamic coefficient,hysteresis curve etc.,showed that the reinforcement measures significantly increased the seismic resistance of this kind of brick-wood structure.At same time,the reinforcement measures could achieve the seismic design target of “operational under minor earthquakes, repairable damage under design basis earthquakes,and collapse prevention under rare earthquakes.”
SEISMIC EVALUATION FOR AN OLD AUDITORIUM IN NANJING

CHEN Yu,LU Wei-dong,LIU Wei-qing

DOI: https://doi.org/10.3969/j.issn.1000-4726.2010.09.006

2010-01-01

Abstract:The old auditorium in NanJing is built in 1928 which didn’t consider seismic design then and the seismic capability of this building is insufficient.Now this building needs to update service functions without changing the building original elevation.So the testing on site and seismic evaluation are concluded in structure system,and we give detailed construction and reasonable reinforcement suggestion.
Structural planning and seismic design of a high-rise apartment building with weak story

Cong-Lu Qin,Ai-Hui Zhang,Lei Qian,g Gan Gan

2006-01-01

Abstract:Structural plans are proposed for a high-rise apartment building with 7.6m height of the first story. The particular large height makes the building become a irregular one with soft and weak story. The seismic performances of the wall-frame and pure frame plan are compared based on nonlinear time history analysis under very rear earthquake. As a result, the lateral stiffness of the first story and the torsional stiffness of the building become reasonable and acceptable, and the seismic performance of the building is improved and satisfied with the three-level criterion of the seismic code by adopting wall-frame plan.
Analysis of Time-History on the Seismic Properties of the Integral Structure after Adding Steel Storeys on Top of the Concrete Frame

Ma Jiansuo,Zhang Tao,Wang Yuanqing,Cai Huanqin

DOI: https://doi.org/10.3969/j.issn.1000-1301.2006.03.032

IF: 2.8

2006-01-01

Earthquake Engineering and Engineering Vibration

Abstract:Significant differences occur in the mass,stiffness,period and damp ratio after adding steel storeys on the top of the original building.It is necessary to analyze the integral structure due to the unreliability of calculating the adding storeys independently.In this paper,an FEA software package ANSYS was employed to one four-storey reinforced concrete office building with two-storey steel frame on the top to do the time-history analysis on the seismic properties.Some suggestions are proposed on seismic design of adding storeys.
Seismic performance evaluation on the south tower structure of Taiyuan Power Co.Office Building

Meng Liang,Yin Xiong,Wei Kaizhong,Gan Gang

DOI: https://doi.org/10.19701/j.jzjg.2013.15.005

2013-01-01

Abstract:The ladder-shaped elevation of the south tower of Taiyuan Power Co.Office Building results in its remarkable mass and rigidity eccentricity in plane as well as its irregularity in torsion,which make the structure exceed some limits of current code of China.PKPM and MIDAS softwares were adopted in the response and elastic time-history analysis under frequently occurr and precautionary earthquake.The pushover analysis was carried out with MIDAS to make sure the structure is safe under seldom occurred earthquake.Countermeasures to solve the problems caused by the ladder-shaped elevation and some key techniques in the structure design are illustrated.
Structure Strenghtening Design with Adding Storey of Beijing International Financial Center

Zhu Keyi,Lou Yu,Ye Lieping

2008-01-01

Abstract:The storey adding and the change of the function result in the axial compression ratio of some frame columns of the built two-storey building exceeding standard limit value.The shear strength of original transition beam cannot meet the code requirements.An exploratory effort is made on the application of carbon fiber to the seismic extension strengthening of the columns,as well as the application of transition beam made of steel fiber reinforced concrete by means of compared calculation and experimental validation.Two technic are successfully adopted in the project of Beijing International Financial Centre.
Seismic appraisal and strengthening design of a brick-frame mixed structure

Shao Jianwen,Gan Gang,Xiao Zhibin

2011-01-01

Abstract:Based on an actual project,the seismic appraisal was made separately for the brick and frame structure,and the key point was found in the strengthening.By adding concrete shear wall and masonry strengthening with concrete splint,the mixed structure was reinforced against the seismic action.With strengthening both in calculation and construction,the single-spanning frame was strengthened avoid to be the worse part in whole structure.The strain monitoring of the underpinning beam was performed during the removal of bear wall,and the results show that the beam can be treated as a wall beam in calculation.
Evaluation and Repair of Construction Damage to an Old Factory Building

Hongnan Wang,Huabo Liu

DOI: https://doi.org/10.1088/1755-1315/769/3/032081

2021-05-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract This paper describes the performance based seismic rehabilitation of an old four-story RC frame building which is being remodeled to be reused as an office building in the creative industrial park. The building is part of the city’s adaptive reuse and redevelopment program. It was designed and constructed in the 1980’s and, therefore, does not meet current design and detailing standards. To make matters worse, two of the first floor columns were badly damaged during renovation and were in danger of collapsing at any time. This paper presents the effects of the accident, failure mechanism, as well as the actions taken to repair the building. The damaged columns are strengthened by a reinforced concrete jacket. The beams closer to damaged columns are retrofitted by externally bonded CFRP. Structural redesign made it feasible to rehabilitate and strengthen the structure sufficient to meet seismic criteria that were judged to be compatible with the site conditions.
Structural Design of Office Building with Resilience and Redundancy using Viscoelastic Dampers

Takeshi Asakawa,Kana Watanabe,Michio Keii

DOI: https://doi.org/10.2749/newyork.2019.1689

2019-01-01

Abstract:4-story steel-frame office building was designed having approximately a rectangular plan of 50 m × 40 m (span 9.6m, 5 spans × 4 spans) in Osaka, Japan. Here, there is a risk of large-scaled earthquakes (subduction-zone earthquake and local earthquake which occurs directly underneath), and high earthquake resistance performance and flexibility as office building were required. Therefore, we designed rigid-framed structures without a brace inside the building and provided seismic elements in only outside frames. One pair of K-type buckling restraint braces and one viscoelastic damper with K-type steel braces are set up for each outside frame on each floor considering the eccentricity of this building. This viscoelastic damper controls the seismic response by the damping due to the response velocity and restrains the residual deformation of each story by ist elastic component. In addition, the viscoelastic damper functions as a fail-safe by ist hardening under the large deformation, preventing collapse under large-scaled earthquake exceeding assumptions. We show the advantage of this type of building in terms of resilience and redundancy with structural analysis results.
Vibration test of a high-rise building and seismic performance analysis

Weidong LU,Zongjian LAN,Weiqing LIU,Depeng L(U)

2010-01-01

Abstract:Through testing the dynamic response signals of high-rise buildings under the excitation of the natural environment vibration,the dynamic behaviors is identified,the accuracy of theoretical calculation results can be verified,which provide basis for structural damage detection and assessment of the safety and key indicators for the seismic analyses of structures and design.Firstly,the vibration tests of an office building with pulsating method are completed for getting the natural frequencies and modes.Then,the modal analysis and seismic calculation of the building by using the finite element method are accomplished.The results show that the testing results agree well with theoretical analysis,and the structure has a good capacity to meet earthquake fortification,therefore,the detect method can get a better overall structural performance.

Design on Seismic Strengthening of an Office Building

Seismic Design for Super-highrise Building Structure

SEISMIC DESIGN OF BUILDING A OF MINDA PLAZA

THE STRUCTURAL DESIGN FOR ADDING TWO MORE STORIES TO AN EXISTING MASONRY STRUCTURE

Structural design for Hangzhou Wanyin International Building

Study on Seismic Performance of Reinforced Concrete Masonry High-Rise Building

Rehabilitation and Strengthening Design of a Great Courtroom and Office Building

Seismic design on ultra-limit high-rise building for Zhongyu International Plaza

Structural Analyses and Design of Seismic Retrofitting with Energy Dissipation Dampers for Beijing Hotel and Other Key Buildings in Beijing

Structural selection and design analysis of a super high-rise office building

Design of base isolation for a high-rise office building in Suqian

Earthquake resistant behavior on seismic strengthening of typical rural brick-wood structure in Beijing

SEISMIC EVALUATION FOR AN OLD AUDITORIUM IN NANJING

Structural planning and seismic design of a high-rise apartment building with weak story

Analysis of Time-History on the Seismic Properties of the Integral Structure after Adding Steel Storeys on Top of the Concrete Frame

Seismic performance evaluation on the south tower structure of Taiyuan Power Co.Office Building

Structure Strenghtening Design with Adding Storey of Beijing International Financial Center

Seismic appraisal and strengthening design of a brick-frame mixed structure

Evaluation and Repair of Construction Damage to an Old Factory Building

Structural Design of Office Building with Resilience and Redundancy using Viscoelastic Dampers

Vibration test of a high-rise building and seismic performance analysis