Abstract:To overcome the lagged strain and insufficient stiffness of conventional reinforced structures, this article proposes a reinforcement method realized by combining prestressed polyethylene terephthalate (PET) straps and angle steel. This combined reinforcement method relies on the active restraint force provided by the PET straps and the vertical bearing capacity provided by the angle steel to improve the bearing capacity and ductility of reinforced structures. This article introduces the experimental process applied to the combined reinforced columns. Thereafter, a finite element simulation model of the columns strengthened by prestressed PET straps and angle steel was established on the basis of the experiment. A plastic damage model was used for the concrete. An ideal elastoplastic model was used for the PET straps, angle steel, and steel bars. In the finite element simulation analysis, a multiparameter analysis was conducted on the eccentric distance, packaging distance, and packaging method. The research results showed that as the packing spacing of the PET straps decreases, the confinement area of the column increases, and the load-bearing capacity and ductility of the specimens increase to some extent. With the increase in the eccentricity, the increase in the bearing capacity of the combined reinforced column is less. Nevertheless, there is significant improvement in the ductility performance. Considering the economy and reinforcement effects, the mesh packing method produces the best results. This article introduces parameters such as the restraint stress of the PET straps and the utilization rate of the angle steel. A calculation formula for the small-eccentric bearing capacity of the combined reinforced column was established, providing a theoretical basis for engineering applications.

SHEAR STRENGTH OF CORRODED REINFORCED CONCRETE COLUMN WRAPPED BY FIBER SHEET WITH LARGE DUCTILITY

Effect of PET Wrapping on Shear Performance of Corroded Reinforced Concrete Columns

Experimental Investigation on Shear Strengthening of Corroded Reinforced Concrete Columns by Pet Fibers with Large Fracturing Strain

Shear strengthening of corroded reinforced concrete columns using pet fiber based composties

Vehicle Collision with Reinforced Concrete Columns Wrapped with Fiber-Reinforced Polymer Composites

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Shear Performance of Reinforced Concrete Beams with Corroded Stirrups in Chloride Environment

Analysis on Shearing Capacity of Concrete Beams with Corroded Stirrups

THE EFFECTS OF CORRODED STIRRUPS ON SHEAR RESISTANCE OF REINFORCED CONCRETE BEAMS

Mechanical Degradation of Reinforced Concrete Columns Corroded Under Sustained Loads

Experimental Study on Shear Behavior of Reinforced-Concrete Members Fully Wrapped with Large Rupture-Strain Frp Composites

Experimental study on shear performance of PET FRP-strengthened RC beams without stirrups

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Steel corrosion induced shear performance deterioration of RC beams: Experimental investigation and numerical simulation

Shear Behavior of RC Beams with Corroded Stirrups Strengthened Using FRP Laminates: Effect of the Shear Span-to-Depth Ratio

Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

Effects of Reinforcement Corrosion and Sustained Load on Mechanical Behavior of Reinforced Concrete Columns.

Design of Shear Strengths of Corroded Reinforced Concrete Beams

Seismic performance of large rupture strain FRP retrofitted RC columns with corroded steel reinforcement

Finite element analysis on eccentric compression of reinforced concrete columns strengthened by prestressed polyethylene terephthalate straps and angle steel