Abstract:Phase change materials (PCMs) are materials that can store large amounts of heat during their phase transition from solid to liquid without a significant increase in temperature. While going from liquid to solid this heat is again released. As such, these materials can play an important role in future energy-efficient buildings. If applied in facades as part of a thermal buffer strategy, e.g., capturing and temporarily storing solar energy in so-called Trombe walls, the PCMs are exposed to high solar radiation intensities, which may easily lead to issues of overheating. This paper therefore investigates the melting process of PCM and arrives at potential solutions for countering this overheating phenomenon. This study uses the simulation program Comsol to investigate the heat transfer through, melting of and fluid flow inside a block of PCM (3 × 20 cm2) with a melting temperature of around 25 °C. The density, specific heat and dynamic viscosity of the PCM are modeled as a temperature dependent variable. The latent heat of the PCM is modeled as part of the specific heat. One side of the block of PCM is exposed to a heat flux of 300 W/m2. The simulations show that once part of the PCM has melted convection arises transporting heat from the bottom of the block to its top. As a result, the top heats up faster than the bottom speeding up the melting process there. Furthermore, in high columns of PCM a large temperature gradient may arise due to this phenomenon. Segmenting a large volume of PCM into smaller volumes in height limits this convection thereby reducing the temperature gradient along the height of the block. Moreover, using PCMs with different melting temperature along the height of a block of PCM allows for controlling the speed with which a certain part of the PCM block starts melting. Segmenting the block of PCM using PCMs with different melting temperature along its height was found to give the most promising results for minimizing this overheating effect. Selecting the optimal phase change temperatures however is critical in that case.

Design of indoor temperature control system based on composite phase change materials

Two types of composite phase change panels containing a ternary hydrated salt mixture for use in building envelope and ventilation system

An innovative modified calcium chloride hexahydrate–based composite phase change material for thermal energy storage and indoor temperature regulation

Passive control and stability of the indoor temperature of a closed cavity based on the process of integrating phase change materials

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Development and validation of a questionnaire to evaluate infection control in oral radiology: methodological issues to avoid misinterpretation.

Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building

Integrating phase change material in building envelopes combined with the earth-to-air heat exchanger for indoor thermal environment regulation

Preparation and characterization of metal-organic framework /microencapsulated phase change material composites for indoor hygrothermal control

Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

Phase-change materials for intelligent temperature regulation

Temperature Control in (Translucent) Phase Change Materials Applied in Facades: A Numerical Study

Novel Functional Materials Capable of Humidity Regulation and Thermal Storage for Building Energy Conservation

Effect of thermal parameters on heat storage and release performance of phase change material composite wall

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

EXPERIMENTAL STUDY OF UNDERFLOOR ELECTRIC HEATING SYSTEM WITH LATENT THERMAL STORAGE A AIR SUPPLY

Controllable thermal rectification design for buildings based on phase change composites

Design and analysis of phase change material based floor heating system for thermal energy storage

Characteristics optimization of composite phase-change wall during intermittent heating process

Experimental Study on Phase Change Material with Solar Heater System for Building Heating

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials