Abstract:Introduction. The article addresses the influence of foams, having different origins and expansion ratios, on the structurization of thermal insulation foam concrete. The study is focused on solving the problem of the binder hydration conditions in the interpore space of the foam concrete mixture and maintaining its stability. The goal is to design an economically effective composition. Materials and methods. To analyze the structurization process, foam concrete samples, featuring average density grades D300 and D500, were made using ordinary Portland cement. The nature of the surfactant substance of the foam, its expansion ratio and the water-cement ratio of the solution are the variable factors determining parameters of the material structure. The strength of the foam concrete was used to evaluate the cement hydration conditions. The strength was identified according to GOST 10180. Parameters of the macrostructure were measured using the Levenhuk optical microscope and the LevenhukLite software. Results. It is found that hydration in the interpore space of the mixture is implemented to the fullest extent when a protein foaming agent, featuring a low foam expansion ratio, is used. The foam concrete, thus made, has closed pores, whose diameter varies in a small range of values, while the partition thickness exceeds the maximum size of the cement grain. An increase in the foam expansion ratio and a low value of the water-cement ratio of the solution lead to the uneven distribution of air in the mixture and reduce the thickness of the interpore partition. In this case, the structure of the foam concrete is “friable”; it represents conglomerates of interconnected pores. Conclusions. Since the geometry of the macrostructure of the material has a significant influence on the heat transfer process and strength, the protein foaming agent, featuring a low foam expansion ratio, is preferable for the production of thermal insulation foam concrete using standard Portland cement without re-grinding. Otherwise, a higher foam expansion ratio foam requires an increase in the specific surface area of the binder.

Study on the thermodynamic properties of low density modified foamed cement

Proportioning and Characterization of Portland Cement-Based Ultra-Lightweight Foam Concretes

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete

Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials

Experimental Study of Strength Characteristics of Foam Concrete

Experimental Research on Soiled-based Foamed Concrete

Experimental Study on Preparation of a Novel Foamed Cement with Paraffin/ Expanded Graphite Composite Phase Change Thermal Energy Storage Material

Preparative Techniques and Its Performance of Chemically Foamed Cement Paste

Preparation and characterization of super low density foamed concrete from Portland cement and admixtures

INVESTIGATION OF THE EFFECTS OF DENSITY ON PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF FOAM CONCRETE

Effects of Mixing Techniques and Material Compositions on the Compressive Strength and Thermal Conductivity of Ultra-Lightweight Foam Concrete

Thermal and mechanical properties of gypsum–cement foam concrete: effects of surfactant

Study on Carbon Fixation Ratio and Properties of Foamed Concrete

Study on the Effect of Foam Stability on the Properties of Foamed Lightweight Soils

Compressive and thermal properties of foamed concrete at high temperature

The influence of foams, having different expansion ratios, on the structurization of thermal insulation foam concrete

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

Experimental Research on Properties of High-Strength Foamed Concrete

Optimization of Preparation of Foamed Concrete Based on Orthogonal Experiment and Range Analysis