Abstract:This study aims to obtain the relationship between density and compressive strength of foamed concrete. Foamed concrete is a preferred building material due to the low density of its concrete. In foamed concrete, the compressive strength reduces with decreasing density. Generally, a denser foamed concrete produces higher compressive strength and lower volume of voids. In the present study, the tests were carried out in stages in order to investigate the effect of sand–cement ratio, water to cement ratio, foam dosage, and dilution ratio on workability, density, and compressive strength of the control foamed concrete specimen. Next, the test obtained the optimum content of processed spent bleaching earth (PSBE) as partial cement replacement in the foamed concrete. Based on the experimental results, the use of 1:1.5 cement to sand ratio for the mortar mix specified the best performance for density, workability, and 28-day compressive strength. Increasing the sand to cement ratio increased the density and compressive strength of the mortar specimen. In addition, in the production of control foamed concrete, increasing the foam dosage reduced the density and compressive strength of the control specimen. Similarly with the dilution ratio, the compressive strength of the control foamed concrete decreased with an increasing dilution ratio. The employment of PSBE significantly influenced the density and compressive strength of the foamed concrete. An increase in the percentage of PSBE reduced the density of the foamed concrete. The compressive strength of the foamed concrete that incorporated PSBE increased with increasing PSBE content up to 30% PSBE. In conclusion, the compressive strength of foamed concrete depends on its density. It was revealed that the use of 30% PSBE as a replacement for cement meets the desired density of 1600 kg/m3, with stability and consistency in workability, and it increases the compressive strength dramatically from 10 to 23 MPa as compared to the control specimen. Thus, it demonstrated that the positive effect of incorporation of PSBE in foamed concrete is linked to the pozzolanic effect whereby more calcium silicate hydrate (CSH) produces denser foamed concrete, which leads to higher strength, and it is less pore connected. In addition, the regression analysis shows strong correlation between density and compressive strength of the foamed concrete due to the R2 being closer to one. Thus, production of foamed concrete incorporating 30% PSBE might have potential for sustainable building materials.

INVESTIGATION OF THE EFFECTS OF DENSITY ON PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF FOAM CONCRETE

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

Effects of Mixing Techniques and Material Compositions on the Compressive Strength and Thermal Conductivity of Ultra-Lightweight Foam Concrete

Relation between Density and Compressive Strength of Foamed Concrete

Influence of expanded vermiculite powder and silica fume on properties of foam concretes

Influence of Density, Porosity and Void Size on Thermal Conductivity of Green Lightweight Foamed Concrete

Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete

Investigation of the effect of silica fume and synthetic foam additive on cell structure in ultra-low density foam concrete

Experimental Investigation on Workability and Density of Medium-Range Foam Concrete with Hybrid Fibers

Thermal and mechanical properties of gypsum–cement foam concrete: effects of surfactant

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete

The influence of foams, having different expansion ratios, on the structurization of thermal insulation foam concrete

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

A Detailed Review on Foam Concrete Composites: Ingredients, Properties, and Microstructure

Mechanical Properties of Sustainable Mesocarp Fibre Reinforced Lightweight Foamed Concrete

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

Strength of cellular concrete as a function of density under axial uniaxial compression

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Effect Analysis of Soil Type and Silt Content on Silt-Based Foamed Concrete with Different Density