Abstract:The chemical foaming technique is possibly the most common method of producing porous geopolymers. Despite this, to date, the role of the content and type of surfactant on the pore size distribution of porous geopolymers is not fully perceived, as constant surfactant dosages are usually employed. In addition, the comparison of literature studies is challenging since a distinct mixture of designs is employed. This investigation intends to provide additional insights on the topic, focusing on synthesizing red mud/metakaolin geopolymer foams and envisioning their use in thermal insulating applications. Various mixtures were prepared using three commercially available surfactants, namely Hostapur OSB, sodium dodecyl sulfate (SDS), and Triton X114. The content of the surfactant (0.025, 0.05, and 0.075 wt.%) and the amount of the foaming agent (aluminum powder, Al; 0.05, 0.075, and 0.10 wt.%) was modified, keeping the binder composition constant and the physical properties of the produced geopolymers were characterized. Results show that the combination between sodium dodecyl sulfate (0.025 wt.%) and aluminum (0.10 wt.%) leads to the strongest reduction in the foam density, the lowest value here reported being -400 kg/m3. On the other hand, samples produced with Hostapur OSB have much higher open porosity (up to 47.7%) and water absorption (up to 80.4%) values, showing that this surfactant leads to a pore network with higher connectivity. In addition, the microstructure of the foams, particularly pore morphology (size and shape) and connectivity between the produced pores are highly dependent on the type of surfactant, sodium dodecyl sulfate generating coarser pore size distribution with round, but mostly closed pores, while a narrower pore size distribution coupled with smaller size pores is seen with the Hostapur. These results suggest the feasibility of tuning the foams' properties (porosity and mechanical performance) according to the application by the proper combination of the type of surfactant and their concentration, enabling their use as thermal and acoustic insulators or as filters/membranes in wastewater treatment systems.

Thermal and mechanical properties of gypsum–cement foam concrete: effects of surfactant

Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

INVESTIGATION OF THE EFFECTS OF DENSITY ON PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF FOAM CONCRETE

Influence of expanded vermiculite powder and silica fume on properties of foam concretes

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

Effect of Triterpenoid Saponins as Foaming Agent on Mechanical Properties of Geopolymer Foam Concrete

Effect of Surface Tension, Foaming Stabilizer, and Graphene Oxide on the Properties of Foamed Paste

Characterisation and properties of class C-fly ash based geopolymer foams: Effects of foaming agent content, aggregates, and surfactant

Proportioning and Characterization of Portland Cement-Based Ultra-Lightweight Foam Concretes

The influence of foams, having different expansion ratios, on the structurization of thermal insulation foam concrete

Studies on influence of characteristics of surfactant and foam on foam concrete behaviour

Evaluation of the Nature and Concentration of the Surfactant on the Properties of Red Mud/Metakaolin Porous Geopolymers Foamed with Aluminium

Study on the thermodynamic properties of low density modified foamed cement

Effects of Mixing Techniques and Material Compositions on the Compressive Strength and Thermal Conductivity of Ultra-Lightweight Foam Concrete

Heat of hydration in ultralight cementitious foams incorporating metakaolin and microencapsulated phase change material

Thermal Performance and Electrical Sensitivity of Foamed Concrete Incorporating Ground Granulated Blast-Furnace Slag (GGBS)

Effect of Portland Cement on the Selected Properties of Flue Gas Desulfurization Gypsum-Based Plasters

Determination of the Influence of Hydraulic Additives on the Foaming Process and Stability of the Produced Geopolymer Foams

Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete