Denitrifying phosphorus removal performance optimizationand stable operation of A2N2 system

王梅香,赵伟华,王淑莹,黄宇,潘聪,彭永臻
DOI: https://doi.org/10.3969/j.issn.1000-6923.2016.11.014
2016-01-01
Abstract:The two-sludge denitrifying phosphorus removal system (A2N2) with "anaerobic/nitrification/anoxic/nitrification"operation mode was used to treat low C/N ratio real domestic wastewater in sequencing batch reactors (SBR). Through the operating condition optimization of A2/O-SBR and N-SBR unit, the system achieved efficient denitrifying phosphorus removal performance with the low carbon source sewage and solved the problem of high NH4+-N in A2N-SBR process. Experimental results showed that post-aeration was essential to the efficient nutrient removal performance and long-term stable operation of the A2N2-SBR. Complete denitrifying phosphorus uptake without aerobic phosphorus uptake at the anoxic stage of the A2N2-SBR was disadvantageous to the growth and reproduction of denitrifying phosphorus accumulating organisms (DPAOs). Anaerobic duration of 1.5h in the A2/O-SBR was ensured the complete oxidation of biodegradable COD, and nitrification duration of 5h in the N-SBR provided sufficient time for NH4+-N oxidation. With anaerobic phosphorus release of 1.5h, denitrifying phosphorus uptake of 2h, and aerobic phosphorus uptake of 0.5h in the A2/O-SBR unit, and the first nitrification of 5h and second nitrification of 1h in the N-SBR unit, the average effluent COD, NH4+-N, TN and PO43--P concentrations in the A2N2-SBR system was 46.2, 0.82, 13.63 and 0.82mg/L, respectively. Simultaneous nitrogen and phosphorus removal was achieved in the novel A2N2-SBR system.
What problem does this paper attempt to address?