Abstract:In most oilfields, acid fracturing is widely used for oil production. Understanding the relationship between the individual factors (i.e., carbonate rock types, acid rock reaction kinetics, and deterioration of rock mechanical properties) can provide practical guidelines that can be used for the design and optimization of acid fracturing operation. This paper takes hydrochloric acid, acetic acid, and citric acid as the main research objects and carries out acidification experiments on sandstone in Changqing Oilfield, China. In addition, the effects of tribasic, dibasic, and monobasic acids on the mechanical properties of sandstone were studied. Results show that in this study area, the most obvious effect was seen with the use of dibasic acids (hydrochloric acid + acetic acid), which effectively reduced the sample quality, uniaxial compressive strength, and elastic modulus. Citric acid and Mg promote the conversion of amorphous calcium carbonate to high-crystallinity calcite, forming a white precipitate. Furthermore, it is found by scanning electron microscopy analysis that experimental group 5 (hydrochloric acid + acetic acid) has the most ideal rock erosion effect. Inductively coupled plasma emission spectrometry analysis shows that the acid rock is present in the solution. X-ray diffraction qualitative analysis of the composition and concentration of ions shows that the formation of white precipitates is citric acid and Mg promotes the conversion of amorphous calcium carbonate to high-crystallinity calcite, forming a white precipitate. The findings of this study can help to better understand the erosion, failure state, and failure mechanism of different acid types on sandstone, which may provide certain references and guidelines for sandstone acid fracturing oil production.This article has not yet been cited by other publications.

THE EFFECTS OF SIMULATED ACID RAIN ON THE DETERIORATION OF CARVED STONE

SIMULATED CORROSION BY ACID RAIN ON CARBONATE STONE

Deterioration of Historic Carved Stone at Mount Tai by Simulated Acid Rain

Effects of Simulated Acid Rain on Carbonate Stones Coated with Different Protective Products

Simulated acid rain on the deterioration of calcite and it’s surface corrosion

SIMULATION RESEARCH ON EROSION OF TEMPLE STRUCTURE'S FACIAL MATERIALS BY ACID RAIN

Research on accelerated testing method and surface three-dimensional morphological characteristic evolution of limestone under acid rain environment

Comparison between the Effects of Normal Rain and Acid Rain on Calcareous Stones under Laboratory Simulation

Experimental Investigation on Influence of Acidic Dry-Wet Cycles on Karst Limestone Deterioration and Damage

Investigation of the Effects of Acid Rain on the Deterioration of Cement Concrete Using Accelerated Tests Established in Laboratory

Effect of acid rain on swelling property and microstructure of natural expansive soil

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Damage Time-Dependent Characteristics and Failure Mechanism of Limestone with Different Mineral Compositions Under Acid Hydro-Chemical Solution Erosion

The damage mechanism and deterioration characteristics of acid-corroded sandstone: an experimental study

Acid Rain Resistance Property of Three Fluoro-organosilane Materials for Carbonate Stone

Study on the Performance Degradation of Sandstone under Acidification

Study on the Effect of Dry–Wet Cycles on Dynamic Mechanical Properties of Sandstone Under Sulfuric Acid Solution

Aging damage characteristics of acid‐etched sandstone samples

Investigation into the Gaseous SO2 Attack on Sandstone in the Yungang Grottoes

Characterization and Origin of Weathering Crusts on Kylin Carved-Stone, Kylin Countryside, Nanjing – A Case Study

Analysis of Concrete Corrosion Resistant Performance Based on the Coupled Action of Acid Rain and Carbonization