Abstract:Underground rock is often subjected to the coupled action of acid sulfate, chloride ion corrosion, and external dynamic disturbance: the degree of corrosion and dynamic load can significantly affect the pore structure and mechanical behavior of rock. To quantify the microscopic pore structure changes and macro-dynamic behavior characteristics of acidified corroded sandstone, first, a mixed acidic solution of NaHSO4 and HCl with different pH values was used for immersion corrosion of sandstone; second, the pore structure of sandstone before and after corrosion was quantitatively evaluated by nuclear magnetic resonance (NMR), dynamic loading tests of corroded sandstone were conducted on an SHPB experimental system and scanning electron microscopy (SEM) was used to observe the morphology of corroded sandstone section; and finally, the mechanism of water–rock interaction and damage and fracture of acid-corroded sandstone were analyzed. The results show that, after acidizing corrosion of sandstone, the macropores increase significantly in number and volume, the boundary of the pore structure tends to be fuzzy; the effective porosity, the number of effective pores, and the total porosity increase significantly; the residual porosity, the number of residual pores, and T2 cut-off value decrease. The proportion accounted for by the elastic stage in stress–strain curves of corroded sandstone is lowered; the proportion accounted for by the plastic yield stage is increased; and post-peak rebound is diminished. With the decrease of pH value, the peak stress on acid-corroded sandstone decreases and the peak strain increases. The peak stress on corroded sandstone is negatively correlated with effective porosity and the number of effective pores, but positively correlated with residual porosity, the number of residual pores, and the T2 cut-off value. The reaction of acidic solution with sandstone minerals causes the free fluid space to increase, the bound fluid space decreases, and the number of pores increases, resulting in a decrease in the dynamic strength of acidified sandstone. The fracture of original sandstone after impact failure has no obvious directionality, and the failure mode of grain is the coexistence of intergranular fracture and trans-granular fracture. The fracture of sandstone after acidizing corrosion is obviously directional after impact damage, and the fracture form is single, which is intergranular fracture. The research results can provide a certain reference for the protection of rock engineering under acidic water chemical environment.

SIMULATED CORROSION BY ACID RAIN ON CARBONATE STONE

Simulated acid rain on the deterioration of calcite and it’s surface corrosion

THE EFFECTS OF SIMULATED ACID RAIN ON THE DETERIORATION OF CARVED STONE

Effects of Simulated Acid Rain on Carbonate Stones Coated with Different Protective Products

Research on accelerated testing method and surface three-dimensional morphological characteristic evolution of limestone under acid rain environment

Deterioration of Historic Carved Stone at Mount Tai by Simulated Acid Rain

Comparison between the Effects of Normal Rain and Acid Rain on Calcareous Stones under Laboratory Simulation

Experimental Investigation on Influence of Acidic Dry-Wet Cycles on Karst Limestone Deterioration and Damage

The damage mechanism and deterioration characteristics of acid-corroded sandstone: an experimental study

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

SIMULATION RESEARCH ON EROSION OF TEMPLE STRUCTURE'S FACIAL MATERIALS BY ACID RAIN

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Damage Time-Dependent Characteristics and Failure Mechanism of Limestone with Different Mineral Compositions Under Acid Hydro-Chemical Solution Erosion

Acid Rain Resistance Property of Three Fluoro-organosilane Materials for Carbonate Stone

Investigation of the Effects of Acid Rain on the Deterioration of Cement Concrete Using Accelerated Tests Established in Laboratory

Influence of Chemical Corrosion on Pore Structure and Mechanical Properties of Sandstone

Analysis of Concrete Corrosion Resistant Performance Based on the Coupled Action of Acid Rain and Carbonization

Experimental Study of Effect of Chemical Corrosion on Strength and Deformation of Hard Brittle Limestone

Study on the Process of Mass Transfer and Deterioration of Limestone under Dynamic Dissolution of CO2 Solution

Study on the Effect of Dry–Wet Cycles on Dynamic Mechanical Properties of Sandstone Under Sulfuric Acid Solution

Study on the Performance Degradation of Sandstone under Acidification