Abstract:Electrical wire is one of the primary causes of electrical fires because of short circuiting or overload current. Experiments were carried out to characterize the influence of high currents on flame spread and dripping behaviors over wires. Two samples of polyethylene (PE)-insulated copper wires with different sizes (dc/do = 0.9 mm/3.0 mm for wire #1 and 1.3 mm/4.2 mm for wire #2) were electrified with current, ranging from 10 A to 50 A, to conduct experimental study. Results show that the dripping becomes faster as the current increases and the continuous dripping occurs under high current (I > 40 A for wire #1 and I > 30 A for wire #2), causing the flame to be narrower and shorter. The heat transfer by different passages (radiation, convection, conduction through core and the joule heat) were quantitatively analyzed. The heat feedback from core to the insulation ( qcp) were the dominant heat transfer mode during flame spread over energized wire. Heat required for flame spread ( qreq) is mainly supplied from the core, nearly 80%, including the joule heat ( qjoule) and the heat conduction through the core from the burning zone ( qcc). The proportions qcp/ qreq decreased with the increasing current, and has a sharp decent to 70% or 50% at I = 50 A or 35 A for wire #1 or wire #2, respectively. In addition, the proportion of qcp to the sum of qjoule and qcc drops obviously under high current, which means the dominated role of core heat feedback in heat transfer mode is weakened under high current. A flame spread model for energized wire based on the quantitative analysis of controlling heat transfer mechanism was proposed, and it predicted the flame spread rate well within error of +/- 20%. The findings of the presented study will be essential for simulation study of flame spread behavior over energized wires with high current and may guide the design of future electric fire safety.

Simulative experimental study on wildfire induced breakdown of transmission lines

Experimental Study of Discharge Properties of High Voltage Transmission Lines and Their Relationship with Fire Parameters under Wildfire Conditions

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Experimental Study on the Breakdown of Gaps in Fire

Preliminary Studies on Flashovers of High-Voltage Transmission Lines Induced by Wildfires by Field Survey and Experimental Tests

Experimental Study on Flashover of High-voltage Transmission Lines Induced by Wood Crib Fire

Study on the Breakdown Characteristics of Conductor-Plane Gap under Vegetation Fire Condition Based on the Combustion Features

Research on AC and High Frequency Breakdown Characteristics of Oil-paper Insulation of 220 Kv Current Transformers

A Method to Assess the Wildfire Induced Breakdown of High-Voltage Transmission Lines

Statistical Analysis of Wildfire Accidents Inducing Flashover of Transmission Lines

Discharge Characteristics of Short Air Gap and Insulation Surface under Flame Conditions

Simulation Analysis of Mechanical Properties of DC Transmission Lines Under Mountain Fire Condition

Simulation analysis on the synergistic effect of vegetation ashes and charged particles on the gap electric field distortion

Temperature Evolution Properties of Overhead Line Conductor Exposed to Large-scale Jet Fires Induced by High-pressure Natural Gas Leakage

A flame combustion model-based wildfire-induced tripping risk assessment approach of transmission lines

Study on arc characteristics and combustion feature of tree-wire discharge fault in distribution line

Experiment and Simulation of Air Gap Breakdown Characteristics Under Short-tail Impulse Waveform

Air Breakdown During Fires

Flashover Characteristics of Plastic Cloth on ±800 Kv HVDC Transmission Line

Analysis of Heat Transfer During Flame Spread over Energized-Wire under High Currents

Breakdown Characteristics and Mechanisms of Short Needle–Plate Air Gap in High-Speed Airflow