Abstract:This paper mainly investigates the aerodynamic effect of two different average sizes and three specific nonaxisymmetric rotor tip clearance arrangements on the overall performance and loss mechanism of a four-stage low-speed research compressor (LSRC) at Shanghai Jiao Tong University. The stage was modeled for the steady simulations as a seventh entire annulus computation domain of the inlet vane and the first stage rotor row. The numerical method was validated using experimental data on the radial profiles of total pressure and flow angle at the rotor outlet. Results illustrate that a size increase (from 1.2% span to 2.3% span) in uniform clearance layout will bring adverse effects. The specific degradation in isentropic efficiency is 1.11% and 1.77% at the design and near stall points, respectively. The nonaxisymmetric rotor tip clearance arrangement significantly increases the stall margin by 25%-31% relative to the uniform layout, and the benefit is more pronounced in the case of a larger average clearance size of 48%-57%. However, there are no visible changes in the global performance characteristics. The zigzag-distributed clearance layout has a better performance impact than the other two linearly arranged schemes. Detailed analyses based on the streamwise and spanwise efficiency deviation were carried out to interpret the aerodynamic improvement. Moreover, the differentiated distribution of aerodynamics and specific flow behaviors at the rotor tip were investigated in detail over each rotor passage. Circumferentially averaged performance and radial profiles were performed. Because of the nonaxisymmetric layout, the inlet mass flow and incidence were redistributed in both radial and circumferential directions, further causing a significant alleviation of the blockage arising from the tip leakage flow, especially the region at the first 0.5 axial chord and above 80% span. The loss caused by the nonaxisymmetric tip clearance included not only the leakage flow loss, but also the interference between the leakage flow and the incoming main flow, or the low-energy fluid in the corner region of the casing, and even the loss on the suction surface of the adjacent rotor blade.

Performance Evaluation of a Low-Reaction Compressor with Different Axial Spacing by 2D Unsteady Simulation

Unsteady Simulation of a Subsonic Low-reaction Aspirated Compressor

3d Unsteady Simulation Of A Low Speed Low-Reaction Aspirated Compressor

Effect of Tip Clearance Size on the Performance of a Low-Reaction Transonic Axial Compressor Rotor

Aerodynamic Design of a Multistage Low-Reaction Compressor With Aspiration in Stators

Numerical Investigation of Influence of Rotor-Rotor Gap on Performances of Contra-Rotating Axial Flow Pump

Overall Performance and Loss Analysis of a Low-Speed Research Compressor with Different Nonaxisymmetric Tip Clearance Layouts

Effect of tip clearance dimension on unsteadiness in a low-reaction aspirated transonic compressor rotor

The Influence of Rotor-Stator Spacing on the Loss in One-Stage Transonic Compressor

Numerical study on the clocking effect of a low-speed compressor with different inter-blade-row gaps

Some Effects of Non-Axisymmetric Tip Clearance Layout on Axial Compressor Aerodynamics

Numerical investigation of boundary layer suction on certain highly loaded aspirated compressor at low speeds

Effects of Rotor-Stator Interaction on Flow Field of a Transonic Boundary Layer Suction Compressor

Clocking Effect in a Two-Stage Compressor with Different Inter-Blade-row Gaps

Influence of Rotor-Stator Axial Clearance on Compressor Rotating Stall Characteristics

Numerical Simulation of Rotor Clocking Effect in a Low-Speed Compressor

Numerical Investigation of the Stator Hub Gap Effects on Aerodynamic Performance of a High-Pressure Compressor

Parallel steady/unsteady flow simulations of an 8.5-stage axial compressor

Aerodynamic Design and Analysis of a Low-reaction Axial Compressor Stage

Full Annulus Simulation on a Multistage Axial-Centrifugal Combined Compressor

Numerical simulation of unsteady single-stage transonic axial compressor flow