Abstract:Gas turbines are widely used as important equipment for electricity generation on islands and offshore platforms. During the operation of a gas turbine, the flame shape in the combustion chamber undergoes variations in response to changes in parameters such as gas turbine load, fuel distribution, and burner structure. These alterations in flame shape exert influence on combustion instability, emissions, and load characteristics. This study explores the variations in flame transition, emissions, and operating parameters among three distinct center stage structures: namely, the non-premix center stage (NPCS), premix center stage (PCS), and enhanced premix center stage (PCSE). The investigation is conducted using a heavy-duty gas turbine hybrid burner on a full temperature, full pressure, and full-size single burner experimental bench. Simultaneously, a multi-parameter numerical simulation regarding the influence of the central fuel split on flame shape analysis was conducted using the PCS burner under the design point for a more in-depth understanding of the mechanisms and for influencing factors associated with flame transition. The findings indicate that variations in flame transition loads among different central stage structures: for the NPCS burner, the transition occurs between 45% and 50% load; for the PCS burners, it takes place between 60% and 65% load; for the PCSE burners, it shifts between 55% and 60% load. Additionally, a reduction in NOx emissions is observed during the flame transition process. Furthermore, it was found that decreasing the central stage fuel results in a decline in flame angle for the same burner structure. As the central stage fuel diminishes to a specific value, the flame shape undergoes a sudden change. Further reduction in central stage fuel does not significantly affect the flame shape and temperature distribution.

Effects of Fuel Premixed Characteristics on Combustion Characteristics of Combustor

A Numerical Study of the Fuel/air Mixing Law Specific to the Premixing Section of a Gas Turbine Combustor

Effects of Equivalence Ratio and Premixing Pattern on Flameless Combustion

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Analysis of the Mixing and Emission Characteristics in a Model Combustor

Analysis and Experiments about the Characteristics of Mixing Process in the Premixed Gas Turbine

Effects Of Equivalence Ratio On The Off-Design Combustion Performance Of Adjustable Fuel Feeding Combustor For A Micro-Gas Turbine

Combustion characteristics of ignition processes for lean premixed swirling combustor under visual conditions

Effect of fuel flexibility on combustion performance of a micro-mixing gas turbine combustor at different fuel temperatures

The effects of swirl number on the combustion characteristics in an internally-staged combustor

Study on the Flame Transition Characteristics of a Gas Turbine Combustor

Impacts of Fuel Stage Ratio on the Morphological and Nanostructural Characteristics of Soot Emissions from a Twin Annular Premixing Swirler Combustor

Emission Characteristics And Axial Flame Temperature Distribution Of A Circumferential Reverse Flow Combustor

B109 EMISSION CHARACTERISTICS AND AXIAL FLAME TEMPERATURE DISTRIBUTION OF A CIRCUMFERENTIAL REVERSE FLOW COMBUSTOR(Combustion-3)

Study on Combustion Performance of Micro Gas Turbine Combustor with Different Fuel

Effects of Preheating Fuel Gas to Micro-scale Flame

Analysis on the Issue of Fuel/Air Premixing Uniformity of the Dry Low NOx Gas Turbine Combustor

Numerical analysis on hydrogen swirl combustion and flow characteristics of a micro gas turbine combustor with axial air/fuel staged technology

Study of the Semi-premixed Combustion Mixed Characteristics of a Reciprocal Porous Medium Heater

Premixed Combustion in A Porous Burner with Different Fuels

Numerical Investigation of Partially Premixed Flames Under Transcritical Conditions