Abstract:In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.

Dynamic Modelling Technology on Milling Process of Aerospace Thin-Walled Workpiece

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Key Technologies of Physics-Based Milling Process Simulation

A State-of-the-Art Review on Chatter Stability in Machining Thin−Walled Parts

Research progress in machining technology of aerospace thin-walled components

Dynamic Modeling for Chatter Analysis in Micro-Milling by Integrating Effects of Centrifugal Force, Gyroscopic Moment, and Tool Runout

Dynamics Modeling-Based Optimization of Process Parameters in Face Milling of Workpieces with Discontinuous Surfaces

Services-oriented intelligent milling for thin-walled parts based on time-varying information model of machining system

Position-oriented process monitoring in milling of thin-walled parts

Stability analysis of thin-walled parts end milling considering cutting depth regeneration effect

Digital Modeling-Driven Chatter Suppression for Thin-Walled Part Manufacturing

Simulation of low rigidity part machining applied to thin-walled structures

Dynamics Modelling and Simulating of Ultra-precision Fly-Cutting Machine Tool

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Modeling dynamics and stability of variable pitch and helix milling tools for development of a design method to maximize chatter stability

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

Modeling and analysis for time-varying dynamics of thin-walled workpieces in mirror milling considering material removal