Abstract:Relative pose detection is a key technology in large component automatic docking systems. In this paper, a measurement system has been developed to detect the relative pose of large aircraft components with draw-wire displacement sensors, while an analytical calculation method has been proposed to determine the docking pose of large aircraft components. This method establishes a measurement model for the docking pose of large components and separates the position and orientation solutions based on the distances between seven sets of measurement points measured by the draw-wire displacement sensors. First, the principle of three-dimensional rendezvous positioning is refined to ascertain the relative position of the components. Then, by analyzing the properties of the rotation matrix and the coupling relationship between the position and orientation variables of the movable component, 15 compatible equations containing only two variables with a maximum degree of four are obtained. Based on this set of equations, a unique solution for the rotation matrix was obtained through the variable substitution method, gradually eliminating higher-order terms. Finally, the correctness of the method is verified through numerical examples. Unlike typical parallel mechanism models, this model can directly obtain 15 compatible equations without the need for methods such as Gröbner bases. Moreover, compared to the measurement method using six draw-wire displacement sensors, a unique solution can be directly determined, solving the problem of multiple solution selection. This measurement method only requires measuring the distance between measurement points to solve the relative pose, with low equipment costs and less susceptibility to external environmental factors.

A Vision Measuring Method for Fork Type Wing-Fuselage Docking

A Fast Binocular Localisation Method For Auv Docking

Research on the Machine Vision Positioning Method Applied in the Docking System

Auv Terminal Docking Experiments Based on Vision Guidance

Terminal Underwater Docking of an Autonomous Underwater Vehicle Using One Camera and One Light

Interference detection method of wing-fuselage joints based on measured data

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Estimation and Alignment Method of Wing Position and Orientation for Aircraft Digital Assembly

Micro- and Nanosatellite Sensorless Electromagnetic Docking Control Based on the High-Frequency Injection Method

Construction of a Measurement System and Analytical Solution for Docking Pose of Large Aircraft Components Based on Draw-wire Displacement Sensors

Docking Pose Measurement Method for Large Components Based on Draw-Wire Displacement Sensors

An optical-based measurement method for center distance between two double-hole components

Development of an Integrated Laser Sensors Based Measurement System for Large-Scale Components Automated Assembly Application.

Measurement Approach for the Pose of Flanges in Cabin Assemblies through Distributed Vision

An automatic measurement method for hull weld seam dimensions based on 3D laser scanning

Accuracy Improvement Calibrations for the Double-Position 4-PPPS Aircraft Docking System

Research on the assembly method of missile based on laser scanning

Method for Extracting Hole Parameters of Aircraft Surface Based on Linear Laser Scanning

A Novel Position and Posture Measuring Method in the Docking of the Towbarless Towing Vehicle and the Aircraft

An Online and Vision-Based Method for Fixtured Pose Measurement of Nondatum Complex Component