Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Joint Measuring and Evaluating Technology for Final Assembly of Aircraft Wing and Fuselage

Finish Machining Condition Evaluation Technology for Aircraft Fuselage-wing Joints

Estimation and Alignment Method of Wing Position and Orientation for Aircraft Digital Assembly

Design and Integration Technology of Communication System of Finish Machining for Aircraft Fuselage-Wing Joints

Enhanced Pose Adjustment System for Wing-Box Assembly in Large Aircraft Manufacturing.

Posture Alignment and Joining Test System for Large Aircraft Fuselages

Optimized Position and Orientation Evaluation of Wing Based on Tolerance Constraints in Aircraft Assembly

A new method for automatic shaft-hole assembly of aircraft components

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Optimal placement of measurement points on large aircraft fuselage panels in digital assembly

Accuracy Analysis with Limited Samples During Aircraft Automatic Join-Assembly

Shimming Design and Optimal Selection for Non-Uniform Gaps in Wing Assembly

Design and Optimization of Flexible Assembly Platform Used for Three Sections Joint

Variation modeling for fuselage structures in large aircraft digital assembly

Interference detection method of wing-fuselage joints based on measured data

Kinematic Modeling and Parameter Identification of A New Circumferential Drilling Machine for Aircraft Assembly

A Helical Milling and Oval Countersinking End-Effector for Aircraft Assembly

A Zigzag Path Based Joining Method for Fuselage Panels in Digital Assembly

A Multi-Object Posture Coordination Method with Tolerance Constraints for Aircraft Components Assembly

Variation modeling and analysis with interval approach for the assembly of compliant aeronautical structures

Evaluation of Residual Clearance after Pre-Joining and Pre-Joining Scheme Optimization in Aircraft Panel Assembly