Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Interference detection method of wing-fuselage joints based on measured data

Estimation and Alignment Method of Wing Position and Orientation for Aircraft Digital Assembly

Optimized Position and Orientation Evaluation of Wing Based on Tolerance Constraints in Aircraft Assembly

Joint Measuring and Evaluating Technology for Final Assembly of Aircraft Wing and Fuselage

Motion data integration and monitoring of digital assembly system of aircraft

Finish Machining Condition Evaluation Technology for Aircraft Fuselage-wing Joints

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Posture Alignment and Joining Test System for Large Aircraft Fuselages

Shimming Design and Optimal Selection for Non-Uniform Gaps in Wing Assembly

Optimal placement of measurement points on large aircraft fuselage panels in digital assembly

A Multi-Object Posture Coordination Method with Tolerance Constraints for Aircraft Components Assembly

Accuracy Analysis with Limited Samples During Aircraft Automatic Join-Assembly

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Assembly Variation Prediction for Compliant Aeronautical Structures Using Fuzzy Interval Analysis

A Zigzag Path Based Joining Method for Fuselage Panels in Digital Assembly

A New Principle and Device for Large Aircraft Components Gaining Accurate Support by Ball Joint

A Vision Measuring Method for Fork Type Wing-Fuselage Docking

On-line posture measurement for automatic positioning of foldable-wing with priority-based multi-constraints

3D full-field wing deformation measurement method for large high-wing airplanes

Saddle Point Programming Based Level-Posture Evaluation Method for Aircraft Wings

A Novel Posture Alignment System for Aircraft Wing Assembly