Abstract:It was anticipated that the residual thermal stress in C/PyC/SiC composite,which was due to the coefficients of thermal expansion mismatch between carbon fiber and SiC matrix,would be decreased by introducing the silicon carbide fiber to the composites.The effects of hybrid styles and hybrid ratio between the carbon fiber and silicon carbide fiber on the residual thermal stress in the composites were studied by constructing the finite element models and calculation.The results show that:(1) the residual thermal stresses in carbon fiber and silicon carbide fiber hybrid reinforced SiC matrix composites are lower than those in C/PyC/SiC composites;(2) the axial residual thermal stresses of SiC matrix in hybrid composites with contacted distribution of carbon fiber and silicon carbide fiber ((xC-ySiC)/PyC/SiC) are lower than those in hybrid composites with alternative distribution of carbon fiber and silicon carbide fiber ((xC×ySiC)/PyC/SiC) at the same ratio of carbon fiber to silicon carbide fiber.(3) Taking an example of contacted distribution of carbon fiber and silicon carbide fiber in ((xC-ySiC)/PyC/SiC) composites,the axial residual thermal stresses of SiC matrix are reduced with the silicon carbide fiber volume percent increases in the ((xC-ySiC)/PyC/SiC) composites.However,the axial residual thermal stresses in SiC matrix decreases from 174 MPa to 170 MPa only when the hybrid fiber volume percent ratio of carbon fiber to silicon carbide fiber change from 1∶2 to 1∶4.

Numerical Simulation of Thermal Residual Stresses For Unidirectional C/SiC Composites

Damage Evolution of the Interphase on C/SiC Composites with CZM Method

Finite Element Simulation of Interface Shear Strength of C/SiC Composites with Thermal Residual Stress

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Measurement and calculation of thermal residual stress in fiber reinforced ceramic matrix composites

Studying the Nonlinear Properties and Strain-Rate Sensitivity of SiC Short Fiber-Reinforced Al Matrix Composites

The Effects of Thermal Residual Stresses and Interfacial Properties on the Transverse Behaviors of Fiber Composites with Different Microstructures

Computational Prediction of SiCf/SiC Stiffness and Thermal Residual Stress by 3D Micro-scale FEA Methods

Modeling and numerical simulation of the mechanical behavior of plain weave C/SiC composites

An Analytical Study of the Influence of Thermal Residual Stresses on the Elastic and Yield Behaviors of Short Fiber-Reinforced Metal Matrix Composites

An Analysis of Thermal Residual Stresses in SiCf/Cu Composites when TiC or Ni As Binder

Computational Prediction of SiC<Subscript>f</Subscript>/SiC Stiffness and Thermal Residual Stress by 3D Micro-scale FEA Methods

Multi-Scale Prediction of Thermal and Mechanical Properties of C/SiC Braided Composites

Numerical Simulation of Ablation Behavior and Thermal Stress Field of Fused Silica Composite

Calculation on residual thermal stress for hybrid fiber reinforced CMC-SiC

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Finite Element Analysis of Residual Thermal Stress in SCS-6 SiC/Ti-24Al-11Nb Composite

Numerical analysis of the stress-strain distributions in the particle reinforced metal matrix composite SiC/6064Al

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

Effects of Interfacial Residual Stress on Mechanical Behavior of SiC F /sic Composites