Abstract:<p>The objective of this work is to evaluate the surge characteristics of an axial compressor operating under surge conditions, by using a hybrid BDF/harmonic balance method. During a surge event, a large amount of backflow occurs in the compressor. Consequently, the airflow oscillates along the axial direction at a low frequency, which can considerably damage the compressor. In this paper, a numerical investigation is performed to examine the effects of the system volume and average mass flow on the surge characteristics of a transonic high speed single stage axial compressor (stage 35) designed and evaluated at the NASA Glenn Center. The results show that the oscillation frequency of the airflow in the compressor generally ranges from 14.32–26.04 Hz during surge conditions, and both the system volume and average mass flow considerably influence the surge characteristics. For a constant average mass flow, as the system volume decreases, the oscillation frequency of the airflow in the compressor increases slightly, while the oscillation amplitude of the exit static pressure decreases significantly, and the maximum static pressure at the outlet remains nearly constant. In the case of a constant system volume, with the decrease in the average mass flow, the oscillation frequency of the airflow in the compressor gradually decreases, and the oscillation amplitude of the exit pressure increases significantly. With a further decrease in the average mass flow, the oscillation frequency stabilizes at a certain point and does not change thenceforth. Furthermore, the surge frequency obtained using the numerical method shows a same tendency with the Helmholtz frequency, but there is a considerable difference between them.</p>

Numerical Predicting Study on Compressor Surge Margin

A Review on Theoretical and Numerical Research of Axial Compressor Surge

Surge Process of a High-Speed Axial–Centrifugal Compressor

Numerical model of predicting surge boundaries in high-speed centrifugal compressors

Evaluation of Surge Prediction Capabilities of Body-Force Model on a High-Speed Multi-Stage Axial-Radial Compressor

Numerical Simulation Of Surge In A Centrifugal Compressor With Different Operating Condition Using The Plenum Model

Numerical Simulation for Centrifugal Compressor under Surge Condition with Correlation Model

A Novel One-Dimensional–Three-Dimensional Coupled Method to Predict Surge Boundary of Centrifugal Compressors

Numerical Prediction of Multi-Stage Axial Compressor Performances

Bleed air CFD modelling in aerodynamic simulation of A heavy duty gas turbine compressor

A numerical study of multistage axial compressor stability

Numerical investigation of the effects of system volume and average mass flow on the surge characteristics of an axial compressor

A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model

A Study of Calculational Model for Predicting Surge Line in a Centrifugal Compression System with Cooler and Condenser

Numerical Investigation of Flow Evolution in Centrifugal Compressors During Surge

Numerical Model of a Deep Surge Cycle in Low-Speed Centrifugal Compressor

Investigation on the Performance Prediction of Single-Stage Axial Compressor by Using Different Turbulence Models

Numerical investigation of deep surge in a centrifugal compressor with vaned diffuser and large plenum

Numerical Method of Transonic Axial Compressor Performance Prediction

Numerical Simulation Method of Surge Experiments on Gas Turbine Engines

Performance Analysis of Multistage Axial Compressor at Surge Conditions