Abstract:Bearing preload has a great impact on the service performance of high-speed spindle, such as the temperature rise and stiffness. Because of the flatness error of spacer, the axial parallelism error of the spindle, the nonuniform heat distribution of ball bearing and the external loads, the outer ring of the bearing is often subjected to nonuniform distributed loads, which will result in the misalignment between outer ring and spindle. In such conditions, traditional uniform preload method may not meet the requirements for bearing temperature rise and spindle rotation accuracy. In this paper, a nonuniform preload is presented which not only includes the preload magnitude in traditional way, but also involves the preload distribution nonuniformly. Firstly, an equivalent transformation for nonuniform preload is built to simplify the nonuniform preload acting on the outer ring. Then based on the Hertz contact theory and ball bearing geometry theory, a five degrees of freedom quasi-static model of ball bearing under nonuniform preload is established. On the basis of this model, internal load and other contact parameters in bearing are calculated and the heat mechanism of ball bearing is analyzed. Finally, according to the heat generation model under nonuniform preload which include both preload magnitude and distribution, effects of both uniform and nonuniform preload on bearing heat and its distribution are investigated and compared, and the contact forces in bearing are then analyzed. The results show that compared with uniform preload, proper nonuniform preload could effectively improve the contact status between balls and rings, decrease the heat generation rate, and reduce the excessive local heat in ball bearing under practical working conditions.

Finite element method on the impact of axial preload on the stiffness of deep-groove ball-bearing

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Stiffness analysis of angular contact ball bearing under non-uniform preload

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

Method of Finite Element Analysis for Multi-support Shaft System Based on the Coupling and Nonlinearity of Bearing Stiffness

Investigation of non-uniform preload effect on stiffness behavior of angular contact ball bearings:

Analysis of axial and overturning ultimate load-bearing capacities of deep groove ball bearings under combined loads and arbitrary rotation speed

The Non-Uniform Preloading Effect On Stiffness Behaviour Of Angular Contact Ball Bearings

Investigating effects of non-uniform preload on the thermal characteristics of angular contact ball bearings through simulations

Finite Element Analysis of Roller Bearing Based on the Plastic Material Models

Heat Analysis of Ball Bearing under Nonuniform Preload Based on Five Degrees of Freedom Quasi-Static Model

A novel approach for preload measurement and analysis of fixed position preload spindle

A nonlinear dynamic approach for analyzing dynamic stiffness of ball bearings at different raceway diameters and guiding clearances

A method for calculating radial time-varying stiffness of flexible cylindrical roller bearings with localized defects

Bearing preload optimization for machine tool spindle by the influencing multiple parameters on the bearing performance

A comprehensive study on dynamic performance of ball bearing considering bearing deformations and ball-inner raceway separation

Thermo-mechanical analysis of angular contact ball bearing

Analysis of Mechanical Properties and Fatigue Life of Microturbine Angular Contact Ball Bearings under Eccentric Load Conditions

Research on Stiffness Behavior of Three Point Contact Ball Bearing in Consideration of Axial Load

STATIC STIFFNESS RESEARCH AND OPTIMIZATION ON A HYBRID MACHINE TOOL CONSIDERING THE STIFFNESSES OF BEARINGS AND GUIDEWAYS

Study on Axial Deformation of Ball Screw