Abstract:In this study, a novel modeling method for a dual-rotor-bearing-casing system is proposed based on the finite element method (FEM) and the model reduction method. The dual-rotor system is modeled using Timoshenko beam and rigid disc elements, while the casing is modeled using shell elements. To reduce the number of degrees of freedom (DOFs), the modified Craig-Bampton method is used to downscale the finite element model of the casing. In addition, the Hertzian contact force and the DOFs of the bearing outer race and pedestal are considered in the bearing model. Through a specific assembly method, a dynamic model of the dual-rotor-bearing-casing is established at the expense of slight increase in the number of DOFs. Based on this dynamic model with fewer DOFs, the effects of two disc imbalances and the rub-impact fault between the low-pressure (LP) turbine and casing are then introduced as an application of the proposed model. The calculation results indicate that the critical speeds of each order of the whole aero-engine model are significantly lower than those of the casing-free model. In the amplitude-frequency diagram, the peak of the critical speed of the whole aero-engine model is found to appear earlier, and the extent of rightward bending is larger. The study also includes parametric analysis to examine the effects of parameters such as the coefficient of friction, the casing-disc contact stiffness, and the casing-foundation connection stiffness. After introducing the nonlinear bearing model, a large number of fractional frequency components are found in the frequency-domain diagram, the dynamic characteristics of the model become more complicated. The coupled bending-torsional effect has also been studied in detail, the calculation results show that it is reasonable to ignore the torsional deformation.

Method of Finite Element Analysis for Multi-support Shaft System Based on the Coupling and Nonlinearity of Bearing Stiffness

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

Numerical Simulation of Drive Axles Considering the Nonlinear Couplings Between Gears and Bearings

Influence of Bearing Stiffness on the Nonlinear Dynamics of a Shaft-Final Drive System

Finite-element implementation for nonlinear static and dynamic frame analysis of tapered members

Lubrication and stability analysis of nonlinear rotor-bearing system

Finite Element Structural Analysis for Bearing System of Heavy-duty Gas Turbine

Finite element method on the impact of axial preload on the stiffness of deep-groove ball-bearing

NONLINEAR FINITE ELEMENT ANALYSIS FOR THE ULTIMATE STRENGTH OF MULTIPLANNAR TUBULAR JOINT

Stiffness analysis of angular contact ball bearing under non-uniform preload

A nonlinear dynamic approach for analyzing dynamic stiffness of ball bearings at different raceway diameters and guiding clearances

Finite Element Analysis of Bearing Capacity of Large-scale Steel Structures

Stiffness Analysis of Machine Tools Using Finite Element Method

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine

Nonlinear characteristic analysis of shaft-bearing-pedestal system considering damage of cylindrical roller bearing

Structural Analysis of Universal Shaft Based on Ansys

Based on Analysis of Finite Element Analysis of Automobile Transmission Shaft Comprehensive Optimization

Modeling and Nonlinear Dynamic Characteristics Analysis of Fault Bearing Time-Varying Stiffness-Flexible Rotor Coupling System

Modeling and analysis of planar multibody systems containing deep groove ball bearing with clearance