Abstract:Rolling bearing is one of the critical parts of the transmission system and has a high demand for operating conditions. Suitable operating conditions can ensure that the rolling bearing has a higher rotation accuracy, which significantly impacts the performance of the transmission system. However, under some unsuitable operating conditions, the rolling bearing in the transmission system is faced with failure and other problems. Cage failure is one of the most common bearing failures. In particular, the cage fracture analysis is the most difficult among rolling bearing failures. In order to research its nonlinear vibration characteristics under cage fracture, a nonlinear model of the rolling bearing (4Nb+4 degrees of freedom) considering cage fracture is established. The contact between bearing rings and the rollers, the circumferential interaction between the flexible cage and the rollers, and the interaction between the rollers under the cage fracture fault are considered. Subsequently, the nonlinear characteristics under cage fracture are analyzed. The nonlinear collision forces of roller and cage under cage fracture and different cage clearances are compared. The results show that the collision force between rollers and the cage is greater when fractured than when the cage is healthy. Under multiple cage fractures (the roller number is odd), more prominent frequency doubling phenomena may occur as the number of fractures increases. More shocks are reflected in the relative angular displacement and waveform. Under multiple cage fractures (the roller number is even), the number and interval of fractures can be determined through the waveform and envelope spectrum. The research in this paper can help the health monitoring and fault diagnosis of bearing cages.

Nonlinear characteristic analysis of shaft-bearing-pedestal system considering damage of cylindrical roller bearing

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Nonlinear vibration analysis of the shaft-bearing-pedestal coupled system with inclined shaft current damage

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Mathematical modeling and dynamic analysis of insulated bearing-steel pedestal system under shaft current damage

Nonlinear vibration characteristics of rolling bearing considering flexible cage fracture

Nonlinear Dynamic Analysis Of Rotor-Bearing-Pedestal Systems With Multiple Fit Clearances

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Modeling and Nonlinear Dynamic Characteristics Analysis of Fault Bearing Time-Varying Stiffness-Flexible Rotor Coupling System

Nonlinear dynamics of full-ceramic bearing-rotor system considering structural defects in cage pockets

Nonlinear dynamic modeling and vibration analysis for early fault evolution of rolling bearings

Nonlinear Dynamic Analysis of a Vertical Rotor-Bearing System

Nonlinear Dynamics of Rotor System Supported by Bearing with Waviness

Dynamic Modeling and Vibration Analysis for Inter-shaft Bearing Fault

Nonlinear dynamic behaviors of ball bearing rotor system

Experimental Verification and Nonlinear Dynamic Response Analysis of a Rolling Element Bearing with Localized Defects

Nonlinear Vibration Analysis of A Cracked Rotor-Ball Bearing System During Flight Maneuvers

Effect of an unbalanced rotor on dynamic characteristics of double-row self-aligning ball bearing

Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered

On the non-linear dynamic behavior of a rotor–bearing system

Nonlinear Dynamic Analysis of Rotor-Bearing System with Cubic Nonlinearity