Abstract:Purpose This paper aims to examine the precision loss of ball screw raceway under different operating conditions and geometry parameters. Design/methodology/approach Based on a new coefficient K’ introduced especially for ball screws to reflect the actual contact condition, the modified Archard theory is applied to ball screws to obtain wear volume of the ball-screw contacts. Thus, the axial precision loss can be defined as the ratio of the wear volume to the contact area. Meanwhile, a novel running bench and a precision-measuring system of ball screws are conducted. Precision variation is obtained and analyzed during the whole life running test, which agrees well with the theoretical values calculated in this paper. Findings For a given rotational speed, the increasing rate of the precision loss rate is high at low axial load and then becomes small with the increasing axial load, whereas for a given axial load, the precision loss rate is proportional to the rotational speed. Besides, the precision loss rate is reduced with the increasing contact angle between a ball and the screw raceway, and is proportional to the helix angle when the angle changes from 1 to 10 degrees. Research limitations/implications The rotational speed used in this experiment is low and the ball screw is of no-load type, although results calculated by the model and Wei’s model seem close when the axial load is high, whether the model built in the paper is applicable to the condition of high rotational speed and preload still needs to be verified in the future work. Practical implications This study provides an accurate model to predict the precision loss of the screw raceway and estimate the remaining life of ball screws, which is significant for better performance of ball screws as well as the computer numerical control machine tools. Originality/value Previous studies on the wear of ball screws mainly focused on the drag torque analysis and mechanical efficiency estimation, and the experiment to verify their theoretical analysis was almost all limited to the test of drag torque or axial rigidity, which is neither sufficient nor persuasive. However, in this paper, the authors proposed a comprehensive wear prediction model which combines the modified Archard wear theory, Hertz contact theory and kinematic theory of ball screws. To the best of the authors’ knowledge, this kind of study has never been reported in the literature. In addition, for the lack of the test bench and high cost of the experiment, the whole life operation test, which is designed and conducted to confirm the model in this paper, has never been reported in literature either.

Study on Axial Deformation of Ball Screw

Study on Ball's Contact Stress in High-load Ball Screw

Investigation into effect of thermal expansion on thermally induced error of ball screw feed drive system of precision machine tools

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Static load distribution and axial static contact stiffness of a preloaded double-nut ball screw considering geometric errors

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Analysis of Thermal Characteristics with Multi-Physics Coupling for the Feed System of a Precision CNC Machine Tool

Dynamic axial contact stiffness analysis of position preloaded ball screw mechanism

Analysis of load distribution and contact stiffness of the single-nut ball screw based on the whole rolling elements model

Load Distribution Analysis and Contact Stiffness Prediction of the Dual-Drive Ball Screw Pair Considering Guide Rail Geometric Error and Slide Position

A time-dependent dynamic model for ball passage vibration analysis of recirculation ball screw mechanism

Adaptive Method to Reduce Thermal Deformation of Ball Screws Based on Carbon Fiber Reinforced Plastics

Research on axial nonlinear vibration characteristics of ball screw feed system considering segmented restoring force

Nonlinear dynamic characteristics of ball screw feed system under thermal deformation

Dynamic Modeling and Experiment Research on Twin Ball Screw Feed System Considering the Joint Stiffness

Investigation of the precision loss for ball screw raceway based on the modified Archard theory

EFFECTS OF VELOCITY ON ELASTIC DEFORMATION IN BALL SCREW DRIVES AND ITS COMPENSATION

Low Order Static Load Distribution Model for Ball Screw Mechanisms Including Effects of Lateral Deformation and Geometric Errors

A new two-stage degradation model for the preload of ball screws considering geometric errors

The influence of different load distribution considering geometric error on the fatigue life of ball screw

Kinematic modeling of a planetary roller screw mechanism considering runout errors and elastic deformation