Abstract:Ball screw has become a key functional component commonly used in actuators of high-end machine tools because of its high transmission efficiency, low environmental impact, and strong universality of working conditions. For the high-precision ball screw, the proper and constant preload is the premise to maintain the transmission accuracy and reliable dynamic characteristics of the ball screw. The direct measurement of the preload is difficult to be achieved. Usually, the preload of the ball screw is indirectly determined by the friction torque of the ball screw under no-load condition. In previous studies, the influence of lubrication on friction torque of the ball screw was not considered, and the influence of operating conditions on performance of lubricant was ignored, and the influence of contact elastic hysteresis effect and the sliding friction effect was not considered, which seriously affected the modeling accuracy of friction torque for the ball screw. Therefore, on the basis of considering the contact elastic hysteresis friction and the sliding friction of the ball screw in the paper, a calculation model of friction torque for the ball screw based on the coupling of the ball load distribution and the thermal elastohydrodynamic lubrication is proposed. The mechanism of different friction terms on the friction torque of the ball screw is analyzed, and the coupling relationship among preload, rotational speed, and friction torque is established. The experimental results show that the proposed method, which the ball load distribution, the thermal elastohydrodynamic lubrication, the elastic hysteresis, and the sliding friction are comprehensively considered, has a good reference significance for improving the internal preload and predicting the precision degradation of the ball screw.

Static load distribution and axial static contact stiffness of a preloaded double-nut ball screw considering geometric errors

Low Order Static Load Distribution Model for Ball Screw Mechanisms Including Effects of Lateral Deformation and Geometric Errors

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Analysis of load distribution and contact stiffness of the single-nut ball screw based on the whole rolling elements model

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Dynamic axial contact stiffness analysis of position preloaded ball screw mechanism

Load Distribution Analysis and Contact Stiffness Prediction of the Dual-Drive Ball Screw Pair Considering Guide Rail Geometric Error and Slide Position

A new two-stage degradation model for the preload of ball screws considering geometric errors

Analysis of contact characteristics of ball screws under the combined loads considering non-uniform load distribution

Study on the load distribution of ball screws with errors

Study on Axial Deformation of Ball Screw

Load Distribution of Ball Screw with Consideration of Contact Angle Variation and Geometry Errors

The influence of different load distribution considering geometric error on the fatigue life of ball screw

Nonlinear dynamic analysis of variable lead preloaded single nut ball screw considering the variation of working parameters

Influences of nut installation mode on a ball screw’s load distribution

Effect of combined geometric errors on static load distribution and deformations for linear rolling guide

Study on Ball's Contact Stress in High-load Ball Screw

A modeling method for predicting friction torque of the preload double-nut ball screw based on thermal elastohydrodynamic lubrication

Variable-Coefficient Dynamic Modeling Method for a Ball Screw Feed System in the No-Extra-Load Running State

An Improved Dynamic Model of Preloaded Ball Screw Drives Considering Torque Transmission and Its Application to Frequency Analysis

Load Distribution of Ball Screw with Contact Angle Variation