Abstract:For large ships and offshore vessels, structural safety is verified through whole-ship analysis using commercial software. In the case of general oil tankers, classification rules for structural strength evaluation are uniformly applied. Structural strength evaluation is mainly divided into the cargo hold, fore-end, and aft-end parts. For the structural design of a cargo ship, it is important to calculate the design load and determine the thickness and size of the structural member. Structural FEA (Finite Element Analysis) is performed on only the cargo hold range as recommended by the CSR (Common Structure Rule). There is no FE analysis recommendation for either the aft- or the fore-end area. Therefore, structural safety is carried out based on existing design experience and engineer judgment. With previous approaches, it is difficult to clarify the safety of the aft-end part according to external loads such as hull girder load and local pressure. Recently, local buckling damage cases have investigated the aft-end of the shuttle tanker. Although this is a good example, it can be recognized that it is necessary to improve the accuracy of prediction when estimating the structural safety at the aft-end part. In this study, a novel FE-based evaluation methodology about buckling damage is proposed. In order to conduct a structural strength verification based on FE analysis modeling, reasonable solutions for load conditions, boundary conditions, modeling methods, and evaluation criteria are presented. This result is expected to be helpful in examining the structural strength of the aft-end part of similar carriers in the future.

Direct Calculation of Buckling and Fatigue Strength of Large Ro-Ro Ship Section

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

Isogeometric Method for Buckling Prediction and Post-Buckling Analysis of Variable Stiffness Composite Underwater Pressure Shell

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Experimental investigation of nonlinear springing and fatigue assessment of a 308,000 DWT oil tanker and a 205,000 DWT bulk carrier in a basin

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

Lateral Buckling of Subsea Pipelines Triggered by Combined Sleeper and Distributed Buoyancy Section

Mechanical Analysis of Submarine Pipeline During Off-Bottom Towing Operation

Simulation of impact load on ship-platform collision

Root Causes of Thin-Plate Buckling Damage at the Aft-End in Crude Oil Tanker and Verification through Buckling Analysis

A Two-Step Approach for Evaluating the Dynamic Ultimate Load Capacity of Ship Structures

Experimental and Numerical Analysis of Supporting Forces and Lashing Forces in a Ship Cargo Securing Scheme

A new analytical model to evaluate ship side collisions with large indentation considering interaction effects between structural components

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Progressive collapse analysis and ultimate strength estimation of continuous stiffened panel under longitudinal extreme cyclic load and lateral pressure

The influence of lateral pressure on ultimate strength of ship structure

Advanced Analysis of Marine Structures—Edition II

A CFD-DEM-FEM coupling method for the ice-induced fatigue damage assessment of ships in brash ice channels