Abstract:With the scaling up of ship in recent years, the explicit modeling of stiffened plates has made the numerical analysis time-consuming. The coordination of a massive number of elements may even bring the problem of convergence and stability, making the analysis unsolvable. The simplification of stiffened plate is particularly urgent in the nonlinear transient dynamic evaluation due to its small step time. Therefore, a simplified approach based on the stiffness equivalence for two-way stiffened plate is proposed. Firstly, based on the equilibrium and compatibility equations, the stiffened plate with orthotropic geometric properties is simplified as a single plate with orthotropic material properties. Then the load-deformation relationship of the single plate is developed by coupling the in-plane and out-of-plane stiffnesses. Subsequently, the simplified approach is used for the local hull structure to verify the applicability under static loading condition. Besides, a coupling model approach is proposed to avoid the local deformation error caused by the homogenization assumption. Afterwards, the modal analysis is conducted based on the simplified model of whole ship. Finally, the nonlinear transient dynamic evaluation of the whole ship model is performed under various collision conditions. For the modal analysis, the results of the homogenization model are accurate. But the simplification does not provide a significant improvement in computational efficiency. For the static and dynamic analysis, the responses of coupled model have good agreement with the detailed finite element model, while the computation time is significantly reduced. The simplified modeling approach can improve the computational efficiency, convergence and stability in the nonlinear transient dynamic evaluation of large ship.

Study on Full-Scale Ships Based on Pure Loss of Stability Criteria

Sensibility Analysis and Further Development for Dead Ship Stability Criteria Based on Local Linearization Method

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Experimental Study on Dynamical Characteristics of Ship Lift System

Study on a simplified dynamical methodology for 2nd level vulnerability assessment in dead ship condition

Assessment of Dead Ship Condition by the IMO Second Generation Intact Stability Criteria for 5000HP Tug Boat

A comparative method for scaling SOLAS collision damage distributions based on ship crashworthiness – application to probabilistic damage stability analysis of a passenger ship

Assessment of Fishing Vessel Vulnerability to Pure Loss of Stability Using a Self-Developed Program

Stability criterion and its calculation for sail-assisted ship

Numerical Investigation into Ship Stability Failure Events in Quartering Seas Based on Time Domain Weakly Nonlinear Unified Model

Study on the Stability Criterion of Crane Ship

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

First Passage Theory for Ship Stability Analysis

Critical Wave Groups Versus Direct Monte-Carlo Simulations for Typical Stability Failure Modes of a Container Ship

Optimization Analysis for the Typical Details of Ship Structures

Ship Stability Analysis: Traditional Methods Versus Geometric Method

Study on the Unequivalence Between Stiffness Loss and Strength Loss of Damaged Hull Girder

A Numerical Method on Large Roll Motion in Beam Seas Under Intact and Damaged Conditions

Numerical Study of Hydrodynamic Derivatives and Course Stability under Ship-Bank Interaction

A simplified modeling and analysis approach for nonlinear transient dynamic evaluation of ship hull with single plate equivalence

Numerical simulation of ship motion and non-linear sea loads of a modern frigate in regular waves