Abstract:Stiffened thin plates made of high-strength steel are widely employed in ship hull structures. Their strength capacity is highly sensitive to the welding imperfections and potential extreme cyclic loading from harsh sea state. In this work, a thermal elasto-plastic finite element analysis is conducted to simulate the 3D distribution of welding-induced residual stress and distortion of stiffened thin plate structures with triple spans and triple bays varying the plate thickness and heat input. Experimental results provided by other scholars are used to validate the welding simulation. Afterwards, the ultimate strength and collapse behaviour of the welded structures under different load patterns are dealt with, including monotonic compression load, cyclic compression-tension load and cyclic compression load. Observation from numerical results indicates that, in general, the compressive strength is reduced in each considered cycle by the residual stress as the amplitude of cyclic compression-tension load approximates to the ultimate compressive strain. When this parameter is much greater than the ultimate compressive strain or the stiffened plate is subjected to cyclic compression load, the reduction in ultimate strength is significant in the first cycle, whereas the reduction is ignorable in the later cycles. Besides, if the buckling mode of initial deflection with antisymmetric configuration is superposed to the symmetric out-of-plane welding distortion, impact of the residual stress will be diminished as the asymmetry becomes notable.

Influence of welding-induced residual stress on underwater acoustic radiation of ring stiffened cylindrical shell

Influence of Welding Residual Stress on Vibration of Circularly Ring-Stiffened Cylindrical Shell

Vibro-Acoustics Characteristics of Non-Uniform Ring Stiffened Cylindrical Shells Using Wave Propagation Approach

The Effect of Welding Residual Stress on the Free Vibration of Underwater Cylindrical Shell

Study on Influencing Factors for Sound Radiation Characteristics of Finite Length Cylindrical Shells

Effect of Welding Residual Stress on Plastic Buckling of Axially Compressed Cylindrical Shells with Patterned Welds

Structure-Acoustic Coupling Analysis of Vibration and Underwater Acoustic Radiation of a Ring-Stiffened Conical Shell

Analysis of Viscoelastic Damping Effect on the Underwater Acoustic Radiation of a Ring-Stiffened Conical Shell

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Effect of Post-Weld Heat Treatment on the Plastic Buckling of Welded Cylindrical Shells

Vibrational and acoustic radiation from a submerged periodic cylindrical shell with axial stiffening

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Acoustics and Vibration Analysis of the Single Ring Stiffened Cylindrical Shell Based on the Effective Line Mobility Theory

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

The Influence of Welding Mechanical Boundary Condition on the Residual Stress and Distortion of a Stiffened-Panel

The Influence of Welding-Induced 3D Residual Stress and Distortion on the Ultimate Strength of Multi-Stiffened Thin Plate Structures under Cyclic Load

The Vibration and Acoustic Radiation from Axially Stiffened Finite Cylindrical Shells in Water

Effect of welding residual stress on the performance of CFST tubular joints

The Effect of Weld Residual Stress on the Free Vibrational Characteristics of Cylindrical Shell Through the Analytical Method

Effect of welding residual stress on the ultimate strength of spherical pressure hull

Finite element analysis of the angular distortion and residual stress in underwater wet welding