Abstract:Due to long-term exposure to high temperatures, it is critical to developing solar selective absorption coating with excellent weather resistance and thermal stability. In this paper, the TiN/TiC–Ni/Mo–Y 2 O 3 cermet-based single-layer nano-composite solar spectrum selective absorption coatings were prepared on the 316L stainless steel matrix by laser cladding. The optimal process parameters ( P = 1000 W, D = 3 mm, and V = 3 mm/s) of laser cladding were selected by combining the experiments and the temperature field simulation of the coating. The results show that the coating with 3 wt.% Y 2 O 3 addition exhibits the best optical performance, i.e., the absorptivity α is 90.0%, the emissivity ε is 2.8% and the photothermal conversion efficiency η is 85.9%. After heat treatment at 800 °C for 24 h, the absorptivity and emissivity of the coating retain 81.0% and 2.9%, respectively, which is better than most single-layer solar selective absorption coating. Moreover, compared to the 316L stainless steel matrix, the self-corrosion potential of coating is increased by 34.7%, and the steady-state average friction coefficient of coating is reduced by 28.6%, indicating its corrosion resistance and wear resistance are significantly improved. In addition, the hardness of the coating is 1.75 times that of the matrix. Hence, the modification of cermet-based coatings by rare earth oxides provides a way for the development of solar selective absorption coatings with exceptional optical properties as well as hard protective characteristics at high temperatures.

SOLAR SELECTIVE ABSORBER BASED ON PARTICLE-SCATTERING EFFECT

Design on solar selective absorbing surface with interference effect

Efficient, Scalable, And High-Temperature Selective Solar Absorbers Based On Hybrid-Strategy Plasmonic Metamaterials

Scalable All-Ceramic Nanofilms As Highly Efficient and Thermally Stable Selective Solar Absorbers

Optimization and Preparation of the High-Efficiency Solar Selective Absorber Based on Double W-SiO2 Cermet Layers

A Novel Design For High-Temperature Solar Selective Coating

High-Performance Spectrally Selective Absorber Using the ZrB 2 -Based All-Ceramic Coatings

Porous Carbon–titania Nanocomposite Films for Spectrally Solar Selective Absorbers

A Facile One-Step Method to Fabricate Multi-Scaled Solar Selective Absorber with Nano-Composite and Controllable Micro-Porous Texture

High-Performance Spectrally Selective Absorber Using the ZrB2-Based All-Ceramic Coatings.

Enhanced thermal stability of the metal/dielectric multilayer solar selective absorber by an atomic-layer-deposited Al2O3 barrier layer

Solar spectral selective absorbing surface by interference and absorption

Wide temperature range and abrasion-resistant anticorrosion of Y2O3-doped cermet-based single-layer nano-composite solar spectrum selective absorbing coating by laser cladding

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

An Ultra-High Temperature Stable Solar Absorber Using the ZrC-Based Cermets

High-Temperature Tolerance in Multi-Scale Cermet Solar-Selective Absorbing Coatings Prepared by Laser Cladding

Wavelength‐Selective Light Trapping with Nanometer‐Thick Metallic Coating

Ultra-broad Wavelength Absorption in High-temperature Solar Selective Absorber Coatings Enabled by High-entropy Nanoceramic AlTiZrHfNbN for High Performance Solar-thermal Conversion

Numerical Study of Alloy/Nanocomposite-based Solar Selective Absorber with High Photo-Thermal Conversion Efficiency

A Selective Metasurface Absorber with An Amorphous Carbon Interlayer for Solar Thermal Applications

Broadband selective solar absorber based on dielectric-filled anti-reflection coated film-coupled two-dimensional metallic photonic crystals