Abstract:Since the advent of the internal combustion engine, knock has been a vital issue limiting the thermal efficiency of spark ignition engines under heavy load conditions. The occurrence of knock is also directly influenced by several operating parameters simultaneously. In order to investigate the effects of multiple variables on economic performance and power performance under knock limits, this study adopts single-objective optimization and multi-objective optimization methods to optimize the engine operating parameters, including exhaust gas recirculation rate, exhaust valve timing, spark timing, and intake valve timing. The optimization aims to obtain maximum volumetric efficiency, brake mean effective pressure, and minimum brake specific fuel consumption on the knock limit. First, based on the bench test data at the operation point 2800 rpm and 11.42 bar, a one-dimensional simulation engine model is established in GT-power software and verified. Second, four engine operating parameters are input into the GT-power model as controlled parameters. The epsilon-constrained differential evolution algorithm and the multi-objective differential evolution algorithm are employed to optimize the above four parameters to minimize the knock index and the damage to engine performance due to knock suppression, respectively. Finally, the results show that the two optimization algorithms optimize four parameters. The results of the epsilon-constrained differential evolution algorithm indicate that the decreasing extent of the knock index is 73.3%. In addition, the decreasing extent of brake mean effective pressure is 10.2%. What is more, the increased brake specific fuel consumption is only 0.07%. The multi-objective differential evolution algorithm gives a set of nondominated Pareto optimal solution sets. The optimal solution has a 64.4% decrease in the knock index, a 5.78% decrease in brake mean effective pressure, and a 1.45% decrease in brake specific fuel consumption.

A Knock Onset Predicting Model for Low Pressure Cooled EGR Boosted Gasoline Engines

A Predictive Model for Knock Onset in Spark-Ignition Engines with Cooled EGR

Improving Machine Learning Model Performance in Predicting the Indicated Mean Effective Pressure of a Natural Gas Engine

Knock Prediction for Dual Fuel Engines by Using a Simplified Combustion Model.

A Phenomenological Model of Knock Intensity in Spark-Ignition Engines

Development of a Model for Predicting the Knock Boundary in Consideration of Cooled Exhaust Gas Recirculation at Full Load

Optimizing Engine Concepts by Using a Simple Model for Knock Prediction

Determination of Knock Limited Spark Advance in Engine Cycle Simulation

Implementation and Parameter Analysis of the Knock Phenomenon of a Marine Dual-Fuel Engine Based on a Two-Zone Combustion Model

A Two-Zone Combustion Model for Knocking Prediction of Marine Natural Gas SI Engines

Numerical analysis on knock for a high compression ratio spark-ignition methanol engine

Co-optimization of Miller Degree and Geometric Compression Ratio of a Large-Bore Natural Gas Generator Engine with Novel Knock Models and Machine Learning

A Generalized Kinetic Model with Variable Octane Number for Engine Knock Prediction

Simulation Research on the Effect of Cooled EGR, Supercharging and Compression Ratio on Downsized SI Engine Knock

Comparative Knock Analysis of HCNG Fueled Spark Ignition Engine Using Different Heat Transfer Models and Prediction of Knock Intensity by Artificial Neural Network Fitting Tool

Numerical Investigation on Combustion System Optimization of Stoichiometric Operation Natural Gas Engine Based on Knocking Boundary Extension

Numerical modeling of knocking combustion in spark ignition engines

Optimization of a Spark Ignition Engine Knock and Performance Using the Epsilon-Constrained Differential Evolution Algorithm and Multi-Objective Differential Evolution Algorithm

Cylinder-to-cylinder Variation of Knock and Effects of Mixture Formation on Knock Tendency for a Heavy-Duty Spark Ignition Methanol Engine

Relationship Between Super-Knock and Pre-Ignition

Modeling Investigation of Different Methods to Suppress Engine Knock on A Small Spark Ignition Engine