Abstract:Graphical and Lay Summary The heterogenous production conditions in large‐scale bioreactors cause scale‐up problems, such as reduced biomass or product yield, to occur during bioprocesses. In this study, we designed a two‐compartment scale‐down reactor and used it to simulate large‐scale heterogenous production conditions, allowing us to understand these scale‐up problems and identify solutions at the laboratory scale. A computational fluid dynamics simulation was used for the design and detailed characterization of the scale‐down setup, as this simulation can model the production scale and support improved bioprocess scale‐up in the future. The scale‐up of bioprocesses remains one of the major obstacles in the biotechnology industry. Scale‐down bioreactors have been identified as valuable tools to investigate the heterogeneities observed in large‐scale tanks at the laboratory scale. Additionally, computational fluid dynamics (CFD) simulations can be used to gain information about fluid flow in tanks used for production. Here, we present the rational design and comprehensive characterization of a scale‐down setup, in which a flexible and modular plug‐flow reactor was connected to a stirred‐tank bioreactor. With the help of CFD using the realizable k‐ε model, the mixing time difference between a 20 and 4000 L bioreactor was evaluated and used as scale‐down criterion. CFD simulations using a shear stress transport (SST) k‐ω turbulence model were used to characterize the plug‐flow reactor in more detail, and the model was verified using experiments. Additionally, the model was used to simulate conditions where experiments technically could not be performed due to sensor limitations. Nevertheless, verification is difficult in this case as well. This was the first time a scale‐down setup was tested on high‐cell‐density Escherichia coli cultivations to produce industrially relevant antigen‐binding fragments (Fab). Biomass yield was reduced by 11% and specific product yield was reduced by 20% during the scale‐down cultivations. Additionally, the intracellular Fab fraction was increased by using the setup. The flexibility of the introduced scale‐down setup in combination with CFD simulations makes it a valuable tool for investigating scale effects at the laboratory scale. More information about the large scale is still necessary to further refine the setup and to speed up bioprocess scale‐up in the future.

From Pilot Plant to Manufacturing: Effect of Scale-Up on Operation of Jacketed Reactors

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Effect Of The Scale-Up Process On The Reactor Performance Within The Riser: Simulation Using Ozone Decomposition

Study on Scale-Up of Anaerobic Fermentation Mixing with Different Solid Content

Effect of process design on the open-loop behavior of a jacketed exothermic CSTR

Computational fluid dynamics simulation improves the design and characterization of a plug‐flow‐type scale‐down reactor for microbial cultivation processes

Scale-up of micro- and milli-reactors : An overview of strategies, design principles and applications

Jacket Temperature Control of a Batch Reactor Using Three Different Temperature Levels

Simulation for Scale-Up of a Confined Jet Mixer for Continuous Hydrothermal Flow Synthesis of Nanomaterials

Quantitative Comparison of Temperature Control of Reactors with Jacket Cooling or Internal Cooling Coils

Adaptive Temperature Control of Multiproduct Jacketed Reactors

Novel Process Windows – Gate to Maximizing Process Intensification via Flow Chemistry

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime

An in-silico analysis of hydrodynamics and gas mass transfer characteristics in scale-down models for mammalian cell cultures

Translating High-Temperature Microwave Chemistry to Scalable Continuous Flow Processes

Scaling Fed-Batch and Perfusion Antibody Production Processes in Geometrically Dissimilar Stirred Bioreactors

CFD Prediction of Scale-Up Effect on the Hydrodynamic Behaviors of a Pilot-Plant Fluidized Bed Reactor and Preliminary Exploration of Its Application for Non-Pelletizing Polyethylene Process

Impact of nozzle operation on mass transfer in jet aerated loop reactors. Characterization and comparison to an aerated stirred tank reactor

Upscaling Plasma-Based CO2 Conversion: Case Study of a Multi-Reactor Gliding Arc Plasmatron

Continuous diameter increase reactor – a reactor concept for maximizing productivity by a controlled diameter extension

Characterization of a pilot plant airlift tower loop reactor: III. Evaluation of local properties of the dispersed gas phase during yeast cultivation and in model media