Exploiting the synergic strengthening effects of stacking faults in carbon nanotubes reinforced aluminum matrix composites for enhanced mechanical properties

Baisong Guo,Min Song,Xinming Zhang,Yangzhen Liu,Xi Cen,Biao Chen,Wei Li

DOI: https://doi.org/10.1016/j.compositesb.2021.108646

2021-01-01

Abstract:Carbon nanotubes (CNTs) reinforced Al matrix composites containing high-density stacking faults were successfully fabricated through spark plasma sintering (SPS) and subsequently hot rolling with high strain rate. It is found that the inclusion of CNTs facilitate the formation of stacking fault in Al matrix. With increasing the CNTs from 0.5 vol% to 1.0 vol%, the density of stacking fault increases, which is mainly because of the reduced stacking fault energy of Al matrix in Al/CNTs composites, as revealed by the density functional theory simulation. Combined with the effective exploitation of the strengthening effectiveness of CNTs due to uniform dispersion of CNTs and well bonded Al-CNTs interface, the highest tensile strength (378 +/- 8 MPa) together with good ductility (17.1 +/- 1.5%) can be achieved for 1 vol% CNTs reinforced Al matrix composite. Moreover, the enhanced strength deriving from each strengthening mechanism relies on the CNTs content. When the CNTs content is 1.0 vol%, Orowan looping and stacking fault strengthening are the dominant strengthening mechanisms. The reported microstructure design and control can be informative for improving the mechanical properties of CNTs reinforced metal matrix composites.