Abstract:Incomplete oxidation on the anode side of a solid oxide fuel cell (SOFC) leaves a considerable amount of unused fuel (e.g., H2 and CO) in the anode exhaust. In order to enhance fuel utilization, CO2-selective membranes can be employed to remove the CO2 in the anode exhaust before returning the recovered fuel to the SOFC. In this study, two membrane processes have been designed for integration with a SOFC system, one with an air sweep (SOFC-MBair) and the other with a vacuum (SOFC-MBvac), on the permeate side. The transport properties of developed membranes were applied to the processes, and techno-economic analysis (TEA) was carried out to estimate the CO2 removal cost of each process. The parameters investigated were the anode exhaust recycle percentage, stack fuel utilization of the SOFC, power output, as well as the area and transport properties of the membranes. Notably, at 100% anode exhaust recycle, the system fuel utilization can be boosted to >99% for both processes. By tuning the stack fuel utilization, a steam-to-carbon ratio above 1.5 is achievable. It was found that the SOFC-MBvac process can achieve a lower CO2 removal cost than the SOFC-MBair process. For the SOFC-MBvac process, by considering the value of the recovered fuel, the CO2 removal cost not only can be fully rebated by the recovered fuel value, but also there is a profit of about $38 per tonne of CO2 captured. Moreover, by taking into account a CO2 sale price of $40/tonne for enhanced oil recovery, a profit of about $66 per tonne of CO2 captured may be achieved. Furthermore, more cost reduction or profit is attainable by developing membranes with higher CO2 permeances. In addition, a zero-carbon electricity generation can be achieved by the SOFC-MBvac process.

Membrane-based Catalytic Partial Oxidation of Ethanol Coupled with Steam Reforming for Solid Oxide Fuel Cells

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Membrane-assisted Propane Partial Oxidation for Solid Oxide Fuel Cell Applications

Thermal Modelling of Ethanol-Fuelled Solid Oxide Fuel Cells

Partial oxidation of methane in a Zr 0.84Y 0.16O 1.92-La 0.8Sr 0.2Cr 0.5Fe 0.5O 3-δ hollow fiber membrane reactor targeting solid oxide fuel cell applications

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Ethanol-fueled metal supported solid oxide fuel cells with a high entropy alloy internal reforming catalyst

Elevated-temperature Bio-Ethanol-assisted Water Electrolysis for Efficient Hydrogen Production

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Enhanced Stability of Co-Reforming Diesel and Methanol into Hydrogen-Enriched Gases for Solid Oxide Fuel Cell Application

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Membrane processes for CO2 removal and fuel utilization enhancement for solid oxide fuel cells

Solid Oxide Fuel Cells Operated by Internal Partial Oxidation Reforming of Iso-Octane

Partial Oxidation of Methane to Syngas in a Perovskite Hollow Fiber Membrane Reactor

Electroosmotic flow steers neutral products and enables concentrated ethanol electroproduction from CO2

Catalyst with CeO 2 and Ni Nanoparticles on a LaCrO 3 -Based Perovskite Substrate for Bio-Alcohol Steam Reforming and SOFC Power Generation

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

Thermal integration of solid oxide fuel cell with ethanol reformer through a heat exchanger network

Progress in Metal-Supported Solid Oxide Fuel Cells and Electrolyzers with Symmetric Metal Supports and Infiltrated Electrodes

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor