Abstract:This paper assessed the growth of CVD composite coatings on three kinds of cermets and the subsequent high-temperature frictional properties. The carbon to nitrogen ratios (C: N) of Ti(C1-x, Nx) powders added to these three cermets were 5:5,7:3 and 10:0, respectively. It was prepared by powder metallurgy. The TiN/α-Al2O3/Ti(C, N)/TiN multilayer coatings were deposited on different Ti(C, N)-based cermets. The results showed that the crystallinity of the composite coating was affected by the contents of nitrogen content. The inner layer TiN coating exhibited a nano-columnar crystal structure, which detected (111) and (200) orientation texture by XRD. The α-Al2O3 coating and Ti(C, N) coating of the three specimens were coarse columnar crystal structures. The variation in the nitrogen content led to the different performances of the coating. Meanwhile, The CVD coating with a C/N ratio of 7:3 had the best comprehensive properties, because the substrate had similar grain-forming directions and more shape nucleation points. The Electron Backscattered Diffraction (EDSB)、Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS) were used to further analyze the microstructure of the samples. The Coating Al2O3 displayed excellent mud (100) value, which indicated that the preferred texture (100) existed and improved the performance of the Al2O3 coating. The adhesion strength of the composite coating on Ti(C0.7, N0.3)-based cermets is the highest. The high-temperature friction wear of the coating was further investigated. Group Y2, which expressed the sample of Ti(C0.7, N0.3)-based cermets CVD coating, demonstrated the lowest wear rate. All control groups’ wear mechanisms included abrasive wear, diffusion wear, and oxidation wear.

Preparation and Enhanced Wear Resistance of HVAF-sprayed Fe-TiB2 Cermet Coating Reinforced by Carbon Nanotubes

Tribological and Corrosion Behavior of HVAF-sprayed (Fe-Tib2)/cnt Composite Coating

Microstructure and corrosion behavior of HVAF-sprayed Fe-based composite coatings doped TiB2 and CNTs

Preparation, mechanical properties and enhanced wear resistance of TiC-Fe composite cermet coating

Research On Wear Behavior Of Atc Cermet Material

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Preparation, mechanical properties and wear resistance of dual-sized TiC particles reinforced high-entropy alloy cermet coating

Improving Wear and Corrosion Resistance of HVAF Sprayed 316L Stainless Steel Coating by Adding TiB2 Ceramic Particles and CeO2

Improving wear and corrosion resistance of HVAF sprayed 316L stainless steel coating by adding TiB 2 ceramic particles and CeO 2

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Effect of TiC Coated MWCNT Content on Friction and Wear Behavior of MWCNT–Ti3SiC2 Composites

Microstructure and wear performance enhancement of carbon nanotubes reinforced composite coatings fabricated by laser cladding on titanium alloy

Effects of Ti Addition on Microstructure and Tribological Properties of in Situ Composite Carbide Coating WC-TiC/FeNi Fabricated by Plasma Transferred Arc Metallurgical Reaction

Improving Wear Resistance and Friction Stability of FeNi Matrix Coating by In-Situ Multi-Carbide WC-TiC Via PTA Metallurgical Reaction

Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes

Study on the growth and wear characters of CVD coating deposited on Ti(C, N)-based cermets with adding different C/N ratios of Ti(C, N) powders

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

Superior wear resistance of dual-phased TiC–TiB2 ceramic nanoparticles reinforced carbon steels

Carbon Nanotubes Improves the Tribological Properties of Ni60/Al<sub>2</sub>O<sub>3</sub> Coatings

Friction and wear behavior of Ti(C,N) self-lubricating cermet materials with multilayer core-shell microstructure

Sliding friction behaviors of TiCN/Cr 3 C 2 -NiCr and TiCN/WC-CoCr duplex coatings fabricated by combining HVOF and HT-CVD procedures