Abstract:As an all-inorganic solid state lighting material, phosphor-in-glass (PiG) receives much attention in high-power white lighting. However, poor heat-dissipation performance and low color rendering index (Ra) caused by low doping concentration of phosphor limit its application in white laser diodes (wLDs). Herein, phosphor-in-glass films on sapphire (PiFS) with heat-conducting properties and high Ra were newly synthesized via screen printing technology, which is highly desired for high-power wLEDs/wLDs. The interfacial corrosion product of CaWO4 between nitride phosphor (CaAlSiN3:Eu2+) and borosilicate glass (BS-glass) was found and investigated in detail firstly to determine the sintering temperature. Laminated structure of PiFS with red layer inside and green layer outside was intentionally designed to effectively avoid 'reabsorption' effect between the red and green emitting phosphors. Compared with the opposite laminated structure, the PiFS exhibited the higher luminance efficiency (LE) and better optical properties (Ra=85, CCT=5362, CIE= (0.3348, 0.3156)) in wLDs. Notably, the adjustable optical characteristics can be achieved by changing the concentration of phosphor, the number of printing layers and the driving current for the application of PiFS in wLED and wLDs. High quality white light in wLED with CIE coordinates (0.3679, 0.3648) was also acquired and showed the excellent color rendering property (Ra = 90.8) and low color correlated temperature (CCT = 4280 K). Further, the working temperature of PiFS stabilized at 47 °C when applied in wLDs (1 W), which greatly prevented the phenomenon of 'thermal quenching' for the phosphors caused by high temperature under high power LDs. Thus, high Ra PiFS prepared by this strategy has better heat dissipation and optical properties than PiG, indicating a prospective application in high-power white LEDs/LDs.

Controlling Phosphor Particle Distribution for High-Angular-Color-Uniformity and Low-Cost LEDs Based on Thermalcapillary Flow

Reducing the cyan-cavity: Lu2MAl4SiO12:Ce3+ (M = Mg, Ca, Sr and Ba) phosphor-in-glass film towards full-spectrum laser-driven lighting

Toward High‐Quality Laser‐Driven Lightings: Chromaticity‐Tunable Phosphor‐in‐Glass Film with “Phosphor Pattern” Design

Optical design for uniform color mixing illumination system

High Stability Carbon Dots Phosphor and Ultra-High Color Rendering Index White Light-Emitting Diodes

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Effective freeform TIR lens designed for LEDs with high angular color uniformity

Novel strategy to optimize luminance for phosphor-converted laser lighting

‘Flip Glass Substrate’ Package Technology for LED Yield and Performance Enhancement

Thermal, optical and electrical analysis on phosphor-converted white LED Chip Scale Packages with both experiment and simulation

Pore-existing phosphor-in-glass film realizing ultra-efficient and uniform laser lighting

Influence of Phosphor Particle Size on Visual and Non-Visual Performances of White Light-Emitting Diodes for General Lighting

Laser-Scanned Programmable Color Temperature of Electroluminescence from White Light-Emitting Electrochemical Cells

Laminated Structure of Phosphor-in-Glass Films on Sapphire with High Color Rendering Index and Heat-Conducting Properties for High-Power White LEDs/LDs

A Luminous Efficiency-Enhanced Laser Lighting Device with a Micro-Angle Tunable Filter to Recycle Unconverted Blue Laser Rays

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Effect of particle sizes and mass ratios of a phosphor on light color performance of a green phosphor thin film and a laminated white light-emitting diode

Design of Optical Structure for Chip-on-board Wafer Level Packaging LEDs

Study on the Performance of Deep Red to Near-Infrared pc-LEDs by the Simulation Method Considering the Distribution of Phosphor Particles

Luminescence mechanism analysis on high power tunable color temperature Chip-on-Board white LED modules

Innovative Architecture for Phosphor‐in‐Glass Films Enabling Superior Luminance and Color Quality Laser‐Driven White Light